Table of Contents
Advertisement
6.3.5
START command
When the scanner receives this command, the scanner reports the size of document
being read.
Byte 1
Byte 2
CNT
CMD
X©02π
X©53π
6.3.6
READ command
When the scanner receives this command, the scanner starts reading based on the
previously set operation mode.
Issuing the response other than Read Complete during read operation causes error.
Byte 1
Byte 2
CNT
CMD
X©02π
X©54π
6.3.7
SENSE command
When the scanner receives this command, the scanner reports the scanner status.
The Sense command can be issued at any time if another command does not require
the response from the scanner.
Byte 1
Byte 2
CNT
CMD
X©02π
X©41π
6.3.8
RETURN SENSE command
By this command, the scanner reports that the carrier unit has come back to the
home position.
Byte 1
Byte 2
CNT
CMD
X©02π
X©42π
Byte 3
and later
$
Byte 3
and later
$
Byte 3
and later
$
Byte 3
and later
$
50FH5037E>02
6 $ 45
Advertisement
Table of Contents
