Pc Card Or Expresscard Problems; Power Problems - Dell Latitude D620 ATG User Manual

User's guide
Hide thumbs Also See for Latitude D620 ATG:
Table of Contents

Advertisement

Cannot connect —
The Dell Mobile Broadband Card must be activated on the network in order to connect. Once the Dell Mobile Broadband Card Utility has
been launched, position the mouse over the
not activated, see
Activate your Mobile Broadband card
your plan.
 
Check your Mobile Broadband network service —
 
Check the Connection status in the Dell Mobile Broadband Card Utility —
connection status in the main window:
 No card detected – Restart the computer and launch the utility again.
l
 Radio Off – Ensure the Mobile Broadband card is enabled by viewing the status in the Dell Mobile Broadband Card Utility. If the card is disabled, enable
l
the Mobile Broadband card by clicking the Turn Radio On button in the main screen of the Dell Mobile Broadband Card Utility.
 Searching – The Dell Mobile Broadband Card Utility has not yet located a Mobile Broadband network. If the searching state persists, ensure that the
l
signal strength is adequate.
 No service – The Dell Mobile Broadband Card Utility did not locate a Mobile Broadband network. Ensure that the signal strength is adequate. Restart
l
the Dell wireless utility or contact your Mobile Broadband network provider.
 Check your Mobile Broadband Network Service – Contact your Mobile Broadband network service provider to verify coverage plan and supported
l
services.
 
Activate your Mobile Broadband card —
provider. For instructions and for additional information about using the Dell Mobile Broadband Card Utility, see the user's guide available through the
Windows Help and Support Center. To access the Help and Support Center, see
Dell Support website at support.dell.com and on the CD included with your Mobile Broadband card if you purchased the card separately from your computer.
 PC Card or ExpressCard Problems
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
 
Check the Card —
Ensure that the card is properly inserted into the connector.
 
Ensure that the card is recognized by Windows —
 
If you have problems with a Dell-provided Card —
 
If you have problems with a Card not provided by Dell —
 Power Problems
Fill out the Diagnostics Checklist (see
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
 
Check the power light —
When the power light is lit or blinking, the computer has power. If the power light is blinking, the computer is in standby mode—
press the power button to exit standby mode. If the light is off, press the power button to turn on the computer.
 
Charge the battery —
The battery charge may be depleted.
 
1. Reinstall the battery.
 
2. Use the AC adapter to connect the computer to an electrical outlet.
 
3. Turn on the computer.
NOTE:
Battery operating time (the time the battery can hold a charge) decreases over time. Depending on how often the battery is used and the
conditions under which it is used, you may need to purchase a new battery during the life of your computer.
 
icon in the taskbar to read the status of the connection. If the status indicates the mobile broadband card is
for more information. If problems persist, contact your Mobile Broadband service carrier for details on
Contact your Mobile Broadband service carrier to verify coverage plan and supported services.
Before you connect to the Internet, you must activate the Mobile Broadband service through your cellular service
Double-click the Safely Remove Hardware icon in the Windows taskbar. Ensure that the card is listed.
Contact Dell (see
Contacting
Contact the PC Card manufacturer.
Diagnostics
Checklist) as you complete these checks.
Click the
icon on the Windows desktop to launch the utility. Check the
Windows Help and Support
Center. The user's guide is also available on the
Dell).

Advertisement

Table of Contents
loading

Table of Contents