Swapping Primary And Secondary Displays; Using The Ambient Light Sensor - Dell Latitude D620 ATG User Manual

You can attach an external monitor or projector to your computer and use it as an extension of your display (known as "dual independent display" or
"extended desktop" mode). This mode allows you to use both screens independently and drag objects from one screen to the other, effectively doubling the
amount of viewable work space.
1. Connect the external monitor or projector to the computer.
2. Click the Start button and click Settings® Control Panel.
3. Under Pick a category, click Appearance and Themes.
4. Under Pick a task..., click the area you want to change, or under or pick a Control Panel icon, click Display.
5. In the Display Properties window, click the Settings tab.
NOTE: If you choose a resolution or color palette that is higher than the display supports, the settings adjust automatically to the closest supported
values. For more information, see your operating system documentation.
6. Click the monitor 2 icon, click the Extend my Windows desktop onto this monitor check box, and then click Apply.
7. Change Screen resolution to the appropriate sizes for both displays and click Apply.
8. If prompted to restart the computer, click Apply the new color setting without restarting and click OK.
9. If prompted, click OK to resize your desktop.
10. If prompted, click Yes to keep the settings.
11. Click OK to close the Display Properties window.
To disable dual independent display mode:
1. Click the Settings tab in the Display Properties window.
2. Click the monitor 2 icon, uncheck the Extend my Windows desktop onto this monitor option, and then click Apply.
If necessary, press <Fn><F8> to bring the screen image back to the computer display.
Swapping Primary and Secondary Displays
To swap your primary and secondary display designations (for example, to use your external monitor as your primary display after docking):
1. Click the Start button and click Settings® Control Panel.
2. Under Pick a category, click Appearance and Themes.
3. Under Pick a task..., click the area you want to change, or under or pick a Control Panel icon, click Display.
4. Click the Settings tab® Advanced® Displays tab.
See the documentation that came with your video card for additional information.
Using the Ambient Light Sensor
The ambient light sensor is located on the bottom of the computer display panel. The sensor detects available environmental light and automatically increases
or decreases the display backlighting to compensate for low-light and high-light environments.
You can enable or disable the ambient light sensor feature by pressing the <Fn> and left-arrow key combination.
NOTE: Do not cover the ambient light sensor with any adhesive labels. If covered up, the sensor automatically sets the display brightness to the
minimum level.