Onboard Feature List - Dell Powerconnect W-ClearPass Hardware Appliances Deployment Manual

Deployment Step
Configure device provisioning settings.
Select certificate options for device provisioning.
l
Select which device types should be supported.
Configure network settings for device provisioning.
Set network properties.
l
Upload 802.1X server certificates.
l
Set device-specific networking settings.
Configure networking equipment for non-provisioned devices.
Set authentication for the provisioning SSID, if required.
l
Ensure the captive portal redirects non-provisioned devices to the device
provisioning page.
Configure networking equipment to authenticate provisioned devices.
Ensure 802.1X authentication methods and trust settings are
l
configured correctly for all EAP types that are required.
Configure OCSP or CRL on the authentication server to check for client
certificate validity.
Configure the user interface for device provisioning.
Set display options for iOS devices.
l
Set user interface options for other Onboard devices.
l
Setup the device provisioning Web login page.
Testing and Verification
Test device provisioning.
Verify that each type of device can be provisioned successfully.
l
Verify that each type of device can join the provisioned network and is
authenticated successfully.
Test device revocation.
Revoke a device's certificate.
l
Verify that the device is no longer able to authenticate.
l
Verify that re-provisioning the device fails.

Onboard Feature List

The following features are available in Dell Networking W-ClearPass Onboard.
Table 13:
Onboard Features
Feature
Automatic configuration of network settings for
wired and wireless endpoints.
Secure provisioning of unique device
credentials for BYOD and IT-managed devices.
Support for Windows, Mac OS X, iOS, and
Dell Networking W-ClearPass Guest 6.0 | Deployment Guide
Reference
"Configuring Provisioning Settings " on page
106
"Configuring Network Settings for Device
Provisioning " on page 117
"Network Requirements for Onboard" on page
71
"Network Requirements for Onboard" on page
71
"Configuring the User Interface for Device
Provisioning" on page 79
Uses
Configure wired networks using 802.1X
l
Configure Wi-Fi networks using either 802.1X or pre-shared key (PSK)
l
Configure trusted server certificates for 802.1X
l
Configure Windows-specific networking settings
l
Configure HTTP proxy settings for client devices (Android, OS X only)
l
Configure EAP-TLS and PEAP-MSCHAPv2 without user interaction
l
Revoke unique device credentials to prevent network access
l
Leverage ClearPass Profiling to identify device type, manufacturer,
l
Onboard Feature List | 67