Configuring An Ios Device Passcode Policy - Dell Powerconnect W-ClearPass Hardware Appliances Deployment Manual

In the Sync Settings group, choose one of the following options from the Days of Mail drop-down list:
No Limit
l
1 day
l
3 days
l
1 week
l
2 weeks
l
1 month
l
Click the Save Changes button to save the Exchange ActiveSync profile and return to the main Onboard
configuration user interface.

Configuring an iOS Device Passcode Policy

To make changes to the Passcode Policy configuration that will be sent to a device, go to Onboard > Passcode
Policy, or click the Passcode Policy command link. The Passcode Policy Settings page opens.
This page is used to configure a passcode policy that is applied to iOS devices when provisioned.
Typically, you would enable this policy when provisioning a corporate-owned device, or if you are allowing a user to
access sensitive information remotely.
NOTE: Onboard Passcode Policy settings can only be used with iOS 4 and iOS 5 devices. Other platforms are not supported.
Dell Networking W-ClearPass Guest 6.0 | Deployment Guide
Configuring an iOS Device Passcode Policy
| 129