Dell Powerconnect W-ClearPass Hardware Appliances Deployment Manual page 98

Mark the Revoke this client certificate check box to confirm that the certificate should be revoked, and then
click the Revoke Certificate button.
Once the certificate has been revoked, future checks of the certificate's validity using OCSP or CRL will indicate
that the certificate is no longer valid.
NOTE: Due to the way in which certificate revocation lists work, a certificate cannot be un-revoked. A new certificate must be
issued if a certificate is revoked in error.
NOTE: Revoking a device's certificate will also prevent the device from being re-provisioned. This is necessary to prevent the user
from simply re-provisioning and obtaining a new certificate. To re-provision the device, the revoked certificate must be deleted.
Delete certificate – Removes the certificate from the list. Trusted certificates that were imported into
l
Onboard may be deleted at any time after import. For all other certificates, this option is only available if the
data retention policy is configured to permit the certificate's deletion. See
for Certificates" on page
98 | Working with Certificates in the List
90.
"Configuring Data Retention Policy
Dell Networking W-ClearPass Guest 6.0 | Deployment Guide