Prerequisites For Integrating Dell Powerconnect W Infrastructure; Feature Implementation Schedule - Dell PowerConnect W-Airwave Manual

Prerequisites for Integrating Dell PowerConnect W Infrastructure

You will need the following information to monitor and manage your Dell infrastructure:
SNMP community string (monitoring & discovery)

Telnet/SSH credentials (configuration only)

"enable" password (configuration only)

NOTE: Without proper Telnet/SSH credentials AWMS will not be able to acquire license and serial information from controllers.
SNMPv3 credentials are required for WMS Offload.

Username

Auth password

Privacy password

Auth protocol


Feature Implementation Schedule

The following table describes the feature implementation schedule for AWMS:
Table 3 Dell PowerConnect W Feature Implementation Schedule for AWMS
Feature
Ability filter User Session by Dell PowerConnect ArubaOS roles
Dell PowerConnect ArubaOS 5.0 support
RAP white list management for RN 3.1
Added support for rogue containment
Added support for configuring controller specific overrides
Client dot11counter status
Added support for AP-92 and AP-93
Ability to use controller WIPS classification within RAPIDS
Use controller classification/confidence level within a RAPIDS rule
Dell PowerConnect ArubaOS provides Ad-Hoc rogues and encryption type 7.1
Channel Utilization
AP dot11counter statistics
Support for SNMPv3 informs
Track BW on wired users connected to RAPs
Ability to configure SNMP local configuration
Ability to track ARM power and channel changes
Ability to track Noise Floor
Ability to track Interfering Devices
Ability to store and display ARM logs
6 | Overview
AWMS Implementation
7.0
7.0
7.0
7.0
7.0
7.0
7.1
7.1
7.1
7.1
7.1
7.1
7.1
7.1
7.2
7.2
7.2
7.2
Dell PowerConnect W AirWave 7.2 | Best Practices Guide