Dell Powerconnect W-ClearPass Hardware Appliances Deployment Manual page 291

Field
modify_schedule_time
multi_initial_sequence
multi_prefix
netmask
no_password
no_portal
no_warn_before
notes
Dell Networking W-ClearPass Guest 6.0 | Deployment Guide
Description
"password" to use the value from the password field;
l
Any other value leaves the password unmodified.
l
This field controls account creation and modification behavior; it is not stored with created
or modified visitor accounts.
String. Value indicating how to modify the schedule_time field.
It may be one of the following values:
"none" to disable the account activation time;
l
"now" to activate the account immediately;
l
"schedule_time" to use the activation time specified in the schedule_time form field
l
(normally a UNIX time, but may be 0 to disable activation time);
"schedule_after" to set the activation time to the current time plus the number of hours
l
in the schedule_after field;
"plus X ", where X is a time measurement, to extend the activation time by X. The time
l
measurement is normally hours, but may have a "ywdhms" suffix to indicate years,
weeks, days, hours, minutes, or seconds, respectively. Alternatively, this operation may
be written equivalently as '+X', 'pX', 'plusX', 'add X', 'addX', or 'aX'. Example: to delay
activation time by 2 days, use the value +2d.
"minus X ", where X is a time measurement, to reduce the activation time by X . See
l
above for details about specifying a time measurement. Alternatively, this operation may
be written equivalently as '-X', 'mX', 'minusX', 'sub X', 'subX', or 'sX'. Example: to bring
forward activation time by 12 hours, use the value -12h.
A time measurement " X ", to set the activation time to the current time plus X .
l
A time and date specification, to set the activation time to that time and date. Many
l
different formats are specified; for clarity it is recommended that a standard format such
as ISO-8601 is used ("YYYY-MM-DD hh:mm:ss" format).
Any other value to leave schedule_time unmodified.
l
This field controls account creation and modification behavior; it is not stored with created
or modified visitor accounts.
Integer. Initial sequence number. This field is used when creating guest accounts and the
random_username_method field is set to "nwa_sequence". If this field is not set, the next
available sequence number for the given multi_prefix is used. Sequence numbering will
start with 0 if no initial sequence number has been set.
String. The prefix of each username generated when creating guest accounts and the
random_username_method field is set to "nwa_sequence".
String. Network address mask to use for stations using the account. This field may be up to
20 characters in length. The value of this field is not currently used by the system. However,
a RADIUS user role may be configured to assign network masks using this field by adding
the Framed-IP-Netmask attribute, and setting the value for the attribute to: <?= $user
["netmask"]
Boolean. If set, prevents a user from changing their own password using the guest self-
service portal. Set this field to a non-zero value or a non-empty string to disable guest-
initiated password changes. The default is to allow guest-initiated password changes,
unless this field is set.
Boolean. If set, prevents a user from logging into the guest service portal. Set this field to a
non-zero value or a non-empty string to disable guest access to the self-service portal. The
default is to allow guest access to the self-service portal, unless this field is set.
Boolean. User does not receive a logout expiration warning. The admin or user can opt out
of this option by setting the field to 1.
String. Comments or notes stored with the account. This field may be up to 255 characters in
GuestManager Standard Fields | 291