Get & Set Objects Feature; Get_Object> Service; Form Post Mode; Request - Dell PowerEdge UPS 500T Notice

4. Get & Set objects feature
The Dell UPS Management Card supports the XML protocol over HTTP or HTTPS to set
parameters.
4.1. <GET_OBJECT> Service
This service downloads from the Dell UPS Management Card the values of all parameters
and data inside the NMC card.
<GET_OBJECT url="get_object.xml" security="none" mode="FORM" /> :
Attribute Description
url Indicates the URL to access to the main menu.
Securi Indicates the security level available for connection.
ty
none: No security in subscription sequence and alarm authentication.
basic: The client is authenticated with a login/password.
ssl: The client is authenticated with a login/password through HTTPS connection.
Mode Indicates the interface access mode
By default use the FORM
FORM: The x-form-urlencoded mode used by HTTP.

4.1.1. FORM POST Mode

This mode uses the same format than a standard browser with a HTML Form does.
The "standard x-form-urlencoded" is as follow:
The POST Header has type "content-type:application/x-form-urlencoded"
The POST Data section is formatted like an HTTP GET request.
If nothing is specified, returns the entire database.
For example:
objectName=UPS.*
Represents objects:
UPS.PowerSummary.iModel
UPS.PowerSummary.iProduct
...
UPS.PowerSummary.PresentStatus.ACPresent
UPS.PowerSummary.PresentStatus.Discharging
...

4.1.2. Request

This service allows getting one or more objects values.
Several objects can be retrieved by a single HTTP/POST request.
The request is made with one or several object name expression.
The expression is made of an object name prefix and an optional "∗" suffix.
2 | P a g e
mode.
N M C D e l l M 2 M p r o t o c o l ( X M L ) – 1 . 1