To modify the instructions provided to users on the device provisioning page, edit the contents of the Header
HTML text area.
The default instructions are displayed to the user as:
This corresponds to the following text prepopulated in the Header HTML text area:
<p>
Please configure security and network settings on your device to allow secure<br>
access to the internal network. Please follow the instructions listed below:<br>
<br>
<strong>1.</strong> {nwa_iconlink icon="images/icon-certificate22.png"
text="Install root certificate (click here)"}{nwa_mdps_config name=root_cert}{/nwa_iconlink}<
br>
<strong>2.</strong> Login below using your {nwa_mdps_config name=organ
ization_name} credentials<br>
<strong>3.</strong> Install the certificate when prompted<br>
<strong>4.</strong> Go to your Wi-Fi settings and connect to SSID: <st
rong>{nwa_mdps_config name=wifi_ssid}</strong>
<br>
</p>
Using the {nwa_mdps_config} Template Function
Certain properties can be extracted from the Onboard configuration and used in the device provisioning page.
To obtain these properties, use the {nwa_mdps_config} Smarty template function. The "name" parameter specifies
which property should be returned, as described in
Table 15:
Properties Available with the
Name
root_cert
80 | Using the {nwa_mdps_config} Template Function
Table
(nwa_mdps_config)
Description
URL of the Onboard certificate authority's root certificate.
Browsing to this URL will install the root certificate on the device, which is required as part of
the pre-provisioning step.
Example:
<a href="{nwa_mdps_config name=root_cert}"> Install Onboard root
certificate</a>
15.
Smarty Template Function
Dell Networking W-ClearPass Guest 6.0 | Deployment Guide