Viewing A Network, Campus, Building View's Rf Environment; Viewing Campuses, Buildings, Or Floors From A Tree View - Dell PowerConnect W-Airwave User Manual

This view is focused on providing insight into the RF environment of an entire floor as follows:
Users - all users associated with all access points on this floor

APs - all access points on this floor

Radios - all radios for all access points on this floor are displayed

Rogues - all rogues are off

Heatmaps - all are off by default

Client/Rogue Surveys - all surveys are off

Walls - all walls are displayed

Lines - client to AP of association

Labels - all labels are disabled


Viewing a Network, Campus, Building View's RF Environment

To view floors from a geographical perspective:
1. Navigate to the VisualRF > Floor Plans page.
2. This will launch the visual QuickView navigation system as shown in
campus, or building successively to drill down further until you reach the floor plan.
Figure 29 Floor Plan View
This navigation provides information in each view as follows:
Network View - contains all campuses within your WLAN

Campus View - all buildings within a campus

Building View - all floors within a building

Floor Plan View - all devices access points, clients, and rogues within the floor


Viewing Campuses, Buildings, or Floors from a Tree View

As an alternative to using QuickView, you can use the Tree View to view floors from a hierarchical tree, as follows:
1. Navigate to the VisualRF > Floor Plans page.
2. Select the Tree icon (
30, appears on the screen.
30 | Setting Up and Tuning VisualRF
)at the bottom right of any view. The Network Tree View window, shown in
Figure 29. Click on each network,
Dell PowerConnect W AirWave 7.2 | VisualRF User Guide
Figure