Viewing A Floor Plan's Rf Environment - Dell PowerConnect W-Airwave User Manual

Figure 25 QuickView Thumbnail in APs/Devices > Monitor page for an AP
A fully interactive QuickView display opens below the thumbnail on the same page (not in a new window), as
shown in
Figure 26 QuickView in APs/Devices > Monitor page for an AP (partial view)
This view is focused on enabling quick resolution of AP issues and therefore disables many RF objects by
default as follows:
Users - only users associated with radios within access point of focus are displayed

APs - only the access point in focus is displayed

Radios - the heatmap represents all radios within the access point of focus

Rogues - all rogues are off

Client/Rogue Surveys - all surveys are off

Walls - all walls on displayed

Lines - client to AP of association are displayed

Labels - all labels are disabled


Viewing a Floor Plan's RF Environment

1. View a floor plan's RF environment from VisualRF >Floor Plans page. This page has a fixed sorting filter of
Campus > Building > Floor number.
28 | Setting Up and Tuning VisualRF
Figure 26:
Dell PowerConnect W AirWave 7.2 | VisualRF User Guide