Tweaking A Planning Region - Dell PowerConnect W-Airwave User Manual

Figure 39 Autoprovision APs Window Illustration
5. When you're finished selecting the desired options, select OK.

Tweaking a Planning Region

If the planning layout does not meet your expectations, you can edit by right-clicking within the region to see the
following options:
Delete Planned APs in the Region - deletes only provisioned APs in the region

Delete the Region - deletes the region and all planned APs.

Edit the region - change the name of the region

Copy the Region to floors above - will copy the region and auto plan for floors above

NOTE: The starting floor will add one to the highest floor in the building and the ending floor defaults to 10 more than the starting
floor.
To replicate a floor plan, follow these steps:
1. Navigate back to the Building view by clicking on the navigation tags in the bottom-right corner of the
window.
2. Right-click the floor and select Duplicate.
42 | Planning and Provisioning Dell PowerConnect W AirWave 7.2 | VisualRF User Guide
.