Importing A Floor Plan; Editing A Floor Plan Image - Dell PowerConnect W-Airwave User Manual

Importing a Floor Plan

The following steps show how to import a floor plan background image file.
1. In VisualRF > Floor Plans, click Add New Floor Plan.
2. Select Browse to locate a floor plan image file.
3. Select the proper file and click Open.
4. In VisualRF, select Upload. This opens the image file along with VisualRF planning tools on the left hand
side.
Figure 33 Floor Plan Imported into VisualRF
If floor plan does not require cropping, sizing, or layer control, then click Save and Close to begin

provisioning APs or Save and New to upload a new floor plan.
If floor plan does require cropping, sizing, or layer control, then proceed to the next procedure.


Editing a Floor Plan Image

There are many ways to edit a floor plan that you have uploaded, as explained in the following topics:
"Cropping the Floor Plan Image" on page 37

"Sizing a Non-CAD Floor Plan" on page 37

"Removing Color from a Floor Plan Image" on page 37

"Assigning Campus, Building and Floor Numbers" on page 38

"Assigning Optional Planner, Owner, or Installer Information for the Floor Plan" on page 38

"Controlling the Layers in the Uploaded Floor Plan (CAD only)" on page 38

"Error Checking of CAD Images" on page 38

36 | Planning and Provisioning Dell PowerConnect W AirWave 7.2 | VisualRF User Guide