Profiles > Aaa > Wired Auth; Profiles > Aaa > Vpn Auth - Dell PowerConnect W-Airwave Configuration Manual

Profiles > AAA > Wired Auth
This profile type merely references an AAA profile to be used for wired authentication.
Perform these steps to configure a
1. Click
2. Click the
profile to edit that profile. The
Table 14 Aruba Configuration > Profiles > AAA > Wired Auth Profile Settings
Field
General Settings
Folder
Name
Referenced Profiles
AAA
3. Click
Wired Auth
Profiles > AAA > VPN Auth
A VPN Authentication profile identifies the default role for authenticated VPN clients. This profile also
references a server group.
Before you enable VPN authentication, you must configure the authentication server(s) and server group
that the controller will use to validate the remote AP. When you provision the remote AP, you configure
IPSec settings for the AP, including the username and password. This username and password must be
validated by an authentication server before the remote AP is allowed to establish a VPN tunnel to the
controller. The authentication server can be any type of server supported by the controller, including the
controller's internal database.
Perform these steps to configure a
1. Click
2. Click the
to edit that profile. The
AirWave Wireless Management Suite | Configuration Guide
Profiles > AAA > Wired Auth
Add
button to create a new
Default
Top
Blank
None
Add Save
or . The added or edited
details page.
Profiles > AAA > VPN Auth
Add
button to create a new
Details
Wired Auth
profile.
Aruba Navigation
in the
Wired Auth
profile, or click the
Details
page appears. Complete the settings as described in
Description
Use this field to set and display the folder with which the profile is
associated. The drop-down menu displays all folders available for
association with the profile.
Folders provide a way to organize the visibility of device parameters that is
separate from the configuration groups of devices. Using folders, you can
view basic statistics about device, and define which users have visibility to
which device parameters.
Enter the name of the Wired Authentication profile.
From the drop-down menu, select the AAA profile for wired authentication.
Click the pencil icon to edit an existing profile or click the add icon to
create a new profile.
Wired Auth
profile appears on the
VPN Auth
profile.
Aruba Navigation
in the
VPN Auth
profile, or click the
page appears. Complete the settings as described in
pane.
pencil
icon next to an existing
AAA Profiles
pane.
pencil
icon next to an existing profile
Aruba Configuration Reference |
Table 14:
page, and on the
Table 15:
73