Advanced Services > Vpn Services > Ipsec > Dynamic Map - Dell PowerConnect W-Airwave Configuration Manual

Add
Click
settings. The
Table 80 Advanced Services > VPN Services > IPSEC Add/Edit Field Descriptions
Field
General Settings
Folder
Name
Other Settings
Maximum MTU Size
(1034-1500 bytes)
Dynamic Maps
Dynamic Maps
Add
Click
profile. This profile appears on the
Advanced Services > VPN Services > IPSEC > Dynamic Map
VPN Services may reference IPSEC profiles. IPSEC profiles reference Dynamic Maps, and Dynamic Maps
reference Transform Sets. This interrelationship is conveyed in the navigation pane of
Configuration
Dynamic maps establish policy templates that are used during negotiation requests in IPSEC. This occurs
during security associations from a remote IPSEC peer in the VPN, even when all cryptographic map
parameters are not known during new security associations from a remote IPSEC peer. For instance, if you
do not know about all the IPSec remote peers in your network, a Dynamic Map allows you to accept
requests for new security associations from previously unknown peers. Note that these requests are not
processed until the IKE authentication has completed successfully. In short, a Dynamic Map is a policy
template used by IPSEC profiles. Dynamic Maps are not used for initiating IPSEC security associations, but
for determining whether or not traffic should be protected in the VPN.
To view Dynamic Maps that are currently configured, navigate to
IPSEC > Dynamic Map
folder.
Add
Click
Add/Edit Details
The
Table 81 Advanced Services > VPN Services > IPSEC > Dynamic Map Add/Edit Field Descriptions
Field
General Settings
Folder
170 | Aruba Configuration Reference
IPSEC
to create a new profile, or click the pencil icon next to an existing profile to modify
Add/Edit Details
page contains the following fields, as described in
Default
Top
Blank
1500
N/A
to complete the creation of the IPSEC profile, or click
.
. This page lists dynamic map names, IPSEC profiles that reference them, and the
Dynamic Map
to create a new
page contains the fields as described in
Default
Top
Description
Use this field to set and display the folder with which the IPSEC
profile is associated. The drop-down menu displays all folders
available for association with the IPSEC profile.
Enter the name of the IPSEC profile.
Define the Maximum transmission unit (MTU) size in bytes.
Select one or more dynamic maps that the IPSEC profile is to
reference. You can add or edit dynamic maps as required. For
additional information, refer to
Services > IPSEC > Dynamic Map" on
Advanced Services > VPN Services > IPSEC
, or click the pencil icon next to an existing map to modify settings.
Description
Use this field to set and display the folder with which the Dynamic
Map is associated. The drop-down menu displays all folders
available for association with the Dynamic Map.
AirWave Wireless Management Suite | Configuration Guide
Table
"Advanced Services > VPN
page 170.
Save
to retain the changes to the IPSEC
page.
Advanced Services > VPN Services >
Table 81:
80:
Device Setup > Aruba