Security > Tacacs Accounting; Security > Time Ranges - Dell PowerConnect W-Airwave Configuration Manual

Security > TACACS Accounting
TACACS+ accounting allows commands issued on the controller to be reported to TACACS+ servers. You
can specify the types of commands that are reported, and these are action, configuration, or show
commands. You can have all commands reported as desired. Aruba Configuration supports TACACS
Accounting servers that can be referenced by server groups.
To view currently configured TACACS Accounting profiles and where they are used, navigate to the
Security > TACACS Accounting
pencil icon to edit an existing profile.
Add/Edit TACACS Accounting Profile
The
Table 70 Security > Server Groups > Add/Edit TACACS Accounting Profile Field Descriptions
Field
General Settings
Folder
Name
Other Settings
Enabled
Server Group
Action
Configuration
Show
Add
Click
existing profile.
Security > Time Ranges
A time range profile establishes the boundaries by which users and guest users are to be supported on the
network. This is a security and access-related profile, and several time range profiles can be configured to
enable absolute or periodic access.
Security > Time Ranges
The
time range profile type, the policy and WLAN that use time range profiles, and the folder in which each profile
is visible.
AirWave Wireless Management Suite | Configuration Guide
page. Click
Default
Top
Blank
No
default
No
No
No
to complete the new TACACS Accounting profile, or click
page displays all time ranges that are currently available in Aruba Configuration,
Add
to create a new TACACS Accounting profile, or click the
page contains the following fields, as described in
Description
Use this field to set and display the folder with which the profile is
associated. The drop-down menu displays all folders available for
association with the profile.
Enter the name of the profile.
Enable or disable the TACACS Accounting profile. If enabled,
additional field appear, in which to define additional parameters,
as follows.
From the drop-down menu, select the server group that is to
reference the TACACS Accounting profile. You can create a new
group by clicking the add icon, or edit an existing group by
clicking the pencil icon. once you are done adding or editing, the
AWMS interface returns you to the TACACS Accounting Profile
page to complete the configuration.
Select this option to have Action commands monitored and
reported by the TACACS Accounting profile.
Select this option to have Configuration commands
monitored and reported by the TACACS Accounting profile.
Select this option to have Show commands monitored and
reported by the TACACS Accounting profile.
Table
Save
to complete the editing of an
Aruba Configuration Reference |
70:
157