Wlans Section; Profiles Section - Dell PowerConnect W-Airwave Configuration Manual

Aruba controllers and AP devices operate in Aruba AP Groups that define shared parameters for all
devices in those groups. The
current Aruba AP groups.
AP Override
Aruba AP group per AP.
The name of any
This establishes the basis of all linking to that device.
Once you have created an
excluded.
For additional information about how to configure and use AP Overrides, refer to these topics:
"AP Overrides Guidelines" on page 37
"Configuring or Editing AP Overrides" on page 37
"AP Overrides Pages and Field Descriptions" on page 52

WLANs Section

Access WLANs with
Figure 4 Device Setup > Aruba Configuration > WLANs Navigation
The following concepts govern the use of WLANs in Aruba Configuration:
WLANs are the same as virtual AP configuration profiles.
WLAN profiles contain several diverse settings to include SSIDs, referenced
Management
This document describes WLAN configuration in the following section and chapter:
"Setting Up Initial Aruba Configuration" on page 24
"General WLAN Procedures and Guidelines" on page 33
"WLAN Pages and Field Descriptions" on page 56

Profiles Section

Profiles provide a way to organize and deploy groups of configurations for Aruba AP Groups, WLANs, and
other profiles. Profiles are assigned to folders; this establishes visibility to Aruba AP Groups and WLAN
settings. Access
16 | Aruba Configuration in AWMS
Device Setup > Aruba Configuration > Aruba AP Groups
allows you to change some parameters for any specific device without having to create an
AP Override
should be the same as the name of the device to which it applies.
AP Override
Device Setup > Aruba Configuration > WLANs
Folders
profiles, and device
Profiles Device Setup > Aruba Configuration > Profiles
with
for a device in a group, you specify the
, illustrated in
.
AirWave Wireless Management Suite | Configuration Guide
page displays all
WLANs
to be included and
Figure 4.
Aruba AP Groups Traffic
,
, illustrated in Figure 5.