Security > Policies > Destinations - Dell PowerConnect W-Airwave Configuration Manual

Table 59 Security > Policy > Add New Policy Field Descriptions (Continued)
Field
Name
Other Settings
Policy Type
Add
Click
Policies > Policies
Security > Policies > Destinations
The Security > Policies > Destinations page lists the destination names currently configured, with the Policy
that uses the destination and the folder. To create a new destination to be referenced by a security policy,
click the
Security > Policies > Add New Destinations
The
Table 60 Security > Policies > Net Destinations Field Descriptions
Field
General Settings
Folder
Name
Other Settings
Invert
Add New Net
Destination Rule
Add
Click
editing of an existing server. The new destination appears on the
AirWave Wireless Management Suite | Configuration Guide
Blank
IPv4 Session
to complete the configuration of the Policies profile. The new policy appears on the
page.
Add New Net Destination
Default
Top
Blank
No
N/A
to complete the configuration of the
Description
Enter the name of the policy.
Specify the type of policy. The options are as follows:
IPv4
IPv6
button. To edit an existing policy, click the pencil icon.
page contains the following fields, as described in
Description
Use this field to set and display the folder with which the security
policy is associated. The drop-down menu displays all folders
available for association with the policy.
Enter the name of the destination.
Use this field to invert the destination from one end of the VPN
connection to the other.
Click this button to create a new rule for this destination profile.
Clicking this button displays the Net Destination Rule section,
which is comprised of two settings:
Rule Type—Specify whether the rule applies to Host,
Network, or Range.
IP Address—Enter the IP address for the net destination rule.
Destination Save
policy profile, or click
Security > Policies > Destinations
Aruba Configuration Reference |
Security >
Table 60:
to complete the
page.
147