Dell PowerConnect W-Airwave Configuration Manual page 142

Table 55 Security > User Roles Page Contents (Continued)
Column
Folder
Security > User Roles > Add New User Role
The
Table 56 Security > User Roles > Add New User Role Field Descriptions
Field
General Settings
Folder
Name
Other Settings
Captive Portal Auth
Downstream
Bandwidth Contract
Downstream Contract
Applies Per User
Upstream Bandwidth
Contract
Upstream Contract
Applies Per User
Maximum Number of
Datapath Sessions
Allowed
Reauthentication
Interval Time
ID of VLAN To Be
Assigned
142 | Aruba Configuration Reference
Description
Displays the folder that is associated with this User Role. A Top viewable folder for the
role is able to view all devices and groups contained by the top folder. The top folder and
its subfolders must contain all of the devices in any of the groups it can view.
Clicking any folder name takes you to the APs/Devices > List page for folder inventory
and configuration.
page contains the following fields, as described in
Default Description
Top Use this field to set and display the folder with which the User Role is
associated. The drop-down menu displays all folders available for
association with the profile.
Blank Enter the name of the user role.
(Optional) Select the Captive Portal Auth profile, if any, that is to be
referenced by the user role. For additional information, refer to
AAA > Captive Portal Auth" on
profile, or click the pencil icon to edit an existing profile.
None (Optional) You can assign a bandwidth contract to provide an upper limit to
upstream or downstream bandwidth utilized by clients in this role. You can
select the Per User option to apply the bandwidth contracts on a per-user
basis instead of to all clients in the role.
For additional information, refer to
on page 143.
No If you selected a DS BW contract in the prior field, this gray field becomes
active. Select Yes or No.
None (Optional) You can assign a bandwidth contract to provide an upper limit to
upstream or downstream bandwidth utilized by clients in this role. You can
select the Per User option to apply the bandwidth contracts on a per-user
basis instead of to all clients in the role.
For additional information, refer to
on page 143.
No If you selected an US BW contract in the prior field, this gray field becomes
active. Select Yes or No.
None Use this field to configure a maximum number of sessions per user in this
role. You can configure any value between 0-65535.
0 (Optional) Set the time, in minutes, after which the client is required to re-
authenticate. Enter a value between 0-4096. 0 disables reauthentication.
Blank (Optional) By default, a client is assigned a VLAN on the basis of the
ingress VLAN for the client to the controller. Use this field to override this
assignment and configure the VLAN ID that is to be assigned to the user
role.
page 69. Click the add icon to create a new
"Security > User Roles > BW Contracts"
"Security > User Roles > BW Contracts"
AirWave Wireless Management Suite | Configuration Guide
Table 56:
"Profiles >