Chapter 9
9.3 Parts Replacement Procedure
9.3.1 Front Cover
9.3.1.1 Removing the Front Cover
1) Remove the paper cassette [1].
2) Open the control panel [1].
3) Open the printer cover [2].
4) Remove the front cover [5].
- 2 screws [3]
- 2 claws [4]
9.3.2 Rear Cover
9.3.2.1 Preparation for Removing the Rear Cover
1) Remove the front cover.
2) Remove the right cover.
3) Remove the left cover.
9.3.2.2 Removing the Rear Cover
1) Remove the 2 shafts [1], and detach the rear cover [2].
2) Remove the rear cover 2 [3].
- 4 screws [1]
- 2 claws [2]
9-2
F-9-2
F-9-3
F-9-4
0016-4962
9.3.3 Right Cover
9.3.3.1 Removing the Right Cover
1) Remove the front cover.
2) Unhook the 6 claws [1], and detach the right cover [2].
9.3.4 Left Cover
9.3.4.1 Removing the Left Cover
1) Remove the front over.
2) Close the printer cover [1].
3) Disengage the claw to remove the holder [2].
0016-4964
0016-4965
4) Remove from the damper rail while picking the damper [1]
F-9-5
F-9-6
F-9-7
0016-4966
0016-4972