1
display cover
2
display panel
3
screws (6)
5. Make a note of the display cable routing on the display cover.
6. Turn the display panel over and place it on a clean surface.
7. Lift the tape that secures the display cable to the display board connector and disconnect the display cable.
1 display cable 2 display board connector
3 tape
4 back of the display panel
8. Remove the six screws (three on each side) that secure the display panel brackets to the display panel.
1 screws (6)
2 display panel brackets (2)
Replacing the Display Panel
1. Follow the instructions in
Before You
Begin.