Table of Contents
Advertisement
Back to Contents Page
AC Adapter Connector
Dell™ Inspiron™ N4010 Service Manual
Removing the AC Adapter Connector
Replacing the AC Adapter Connector
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION:
To help prevent damage to the system board, remove the main battery (see
computer.
Removing the AC Adapter Connector
1. Follow the instructions in
Before You
2. Remove the battery (see
Removing the
3. Follow the instructions from
4. Remove the display assembly (see
5. Remove the middle cover (see
6. Remove the daughter board (see
7. Remove the screw that secures the AC adapter connector to the computer base.
8. Make a note of the AC adapter connector cable routing and lift the AC adapter connector out of the computer base.
1 screw
3 AC adapter connector cable
Replacing the AC Adapter Connector
1. Follow the instructions in
Before You
2. Route the AC adapter connector cable and place the AC adapter connector on the computer base.
3. Replace the screw that secures the AC adapter connector to the computer base.
Begin.
Battery).
step 4
to
step 15
in
Removing the System
Removing the Display
Assembly).
Removing the Middle
Cover).
Removing the Daughter
Board).
2 AC adapter connector
Begin.
Removing the
Board.
Battery) before working inside the
Advertisement
Table of Contents
