Display Hinges; Removing The Display Hinges; Replacing The Display Hinges - Dell Inspiron 14 AMD M4010 Service Manual

2. Replace the six screws (three on each side) that secure the display panel brackets to the display panel.
3. Connect the display cable to the display board connector and secure it with the tape.
4. Align the screw holes on the display panel with the screw holes on the display cover and replace the six screws.
5. Replace the display bezel (see
6. Replace the display assembly (see
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
Display Hinges

Removing the Display Hinges

1. Follow the instructions in Before You
2. Remove the display assembly (see
3. Remove the display bezel (see
4. Remove the display panel (see
5. Remove the two screws (one on each side) that secure the display hinges to the display cover and remove the display hinges.
1

display hinges (2)

2 screws (2)
6. Remove the hinge caps (see

Replacing the Display Hinges

1. Follow the instructions in Before You
2. Replace the hinge caps (see
3. Route the Mini-Card antenna cables on the display hinge.
4. Align the screw hole on the display hinges with the screw hole on the display cover and replace the two screws (one on each side).
5. Replace the display panel (see
6. Replace the display bezel (see
7. Replace the display assembly (see
Replacing the Display Bezel).
Replacing the Display Assembly).
Begin.
Removing the Display Assembly).
Removing the Display Bezel).
Removing the Display Panel).
Removing the Hinge Caps).
Begin.
Replacing the Hinge Caps).
Replacing the Display Panel).
Replacing the Display Bezel).
Replacing the Display Assembly).