Getting To Know The Remote Control - Haier LE32C1320 Owner's Manual

GETTING TO KNOW THE REMOTE CONTROL

PICTURE
Press repeatedly to select a picture mode: Vivid, Standard,
Energy Savings, Mild, Sports or Custom.
POWER
Press to power ON/OFF (standby) the TV.
Note:
• The TV is never completely powered off unless physically
unplugged.
• Press to turn on TV. The LED will change to blue and stop
flashing.
AUDIO
Press repeatedly to switch audio modes: Standard, News, Music,
Theater or Custom.
ARC
Press repeatedly to change the display aspect ratio: Normal,
Zoom, Wide, or Cinema mode.
CCD
Press repeatedly to change the closed caption type: CC Off, CC
On or CC On When Mute.
MTS/SAP
Press to activate the NTSC TV sounds, such as Stereo, SAP or
Mono tone, and audio languages of DTV.
SLEEP
Press repeatedly to set the sleep timer (off / 5 / 10 / 15 / 30 / 60 /
90 / 120 / 180 /240 minutes). The TV will automatically turn off
after the selected amount of time passes.
0 - 9 / number
Press to enter the TV channel number and select a channel
(Press " " to choose the sub-channel).
INPUT
Press repeatedly to select an input source: TV, AV, Component,
VGA, HDMI 1, HDMI 2 or HDMI 3.
MENU
Press to open the on screen display (OSD) menu or return to the
previous menu.
MUTE
Press to switch the sound ON/OFF.
CH+/CH-/VOL+/VOL-/ENTER
When the OSD menu is not displayed:
• Press CH+ or CH- to browse through the TV channels.
• Press VOL+ or VOL- to adjust the volume.
When the OSD menu is displayed on screen:
• Use these buttons as the up, down, left, right and ENTER
buttons to adjust the various options in the OSD menu.
15