Replacing The Processor Module; Procedure; Postrequisites - Alienware M18x R2 Owner's Manual

46
WARNING:
information that shipped with your computer and follow the steps in
"Before You Begin" on page 9. For additional safety best practices
information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
NOTE:
If a new processor module is installed, you will receive a new processor heat-
sink assembly, which will include an affixed thermal pad, or you will receive a new
thermal pad along with documentation to illustrate proper installation.

Procedure

1 Align the pin-1 corner of the processor module with the pin-1 corner of the ZIF socket,
then place the processor module.
NOTE:
The pin-1 corner of the processor module has a triangle that aligns with the
triangle on the pin-1 corner of the ZIF socket.
When the processor module is properly seated, all four corners are aligned at the
same height. If one or more corners of the module are higher than the others, the
module is not seated properly.
CAUTION:
screwdriver perpendicular to the processor module when turning the
cam screw.
2 Tighten the ZIF socket by turning the cam screw clockwise to secure the processor
module to the system board.

Postrequisites

1 Replace the processor heat-sink. See ."Replacing the Processor Heat-Sink" on
page 80.
2 Follow the instructions from step 2 to step 5 in Replacing the Palm Rest.
3 Replace the dispaly assembly. See "Replacing the Display Assembly" on page 48.
4 Replace the macro keyboard. See "Replacing the Macro Keyboard" on page 38.
5 Replace the keyboard. See "Replacing the Keyboard" on page 35.
6 Replace the center control cover. See "Replacing the Center Control Cover" on
page 29.
7 Replace the base cover. See "Replacing the Base Cover" on page 15.
8 Replace the battery pack. See "Replacing the Battery Pack" on page 13.
9 Follow the instructions in "After Working Inside Your Computer" on page 11.
Replacing the Processor
Module
Before working inside your computer, read the safety
To avoid damage to the processor module, hold the

Replacing the Processor Module

83
|