Replacing The Keyboard; Procedure; Post-Requisites - Alienware 15 R3 Service Manual

Replacing the keyboard

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
For more safety best practices, see the Regulatory Compliance home
page at www.dell.com/regulatory_compliance.

Procedure

CAUTION: Make sure that no cables are under the keyboard.
1 Slide the keyboard under the tabs on the palm-rest assembly.
2 Align the screw holes on the keyboard bracket with the screw holes on the
palm-rest assembly.
3 Replace the palm-rest assembly screws (M2x3) that secure the keyboard
bracket to the palm-rest assembly.

Post-requisites

1 Replace the
2 Follow the procedure from step 2 to step 16 in
3 Replace the
4 Replace the battery.
5 Replace the
6 Replace the
7 Replace the
8 Follow the procedure from step 4 to step 6 in
9 Replace the
10 Replace the
power-button board.
memory modules.
computer base.
rear-I/O cover.
solid-state drive.
wireless card.
base cover.
computer. After working inside your
After working inside your
"Replacing the hard
"Replacing the system
computer.
board".
drive".
57