Ironware Software Release 02.8.00A For Brocade Bigiron Rx Series Swtches - Brocade Communications Systems PowerConnect B-RX Release Note

Multi-service ironware software release 02.8.00a for brocade bigiron rx series switches

Hide thumbs Also See for PowerConnect B-RX:

Release note (46 pages)

Release note (40 pages)

Table Of Contents

Table of Contents

Defect ID: DEFECT000287890

Summary:

BGP "allowas-in" does not work correctly with confederation configuration.

Symptom:

BGP Routes received from peer with local AS (in as-path) are dropped even though "allowas-in" is used for

that particular peer. This issue observed only when confederation is configured, wIthout confederation it works

as expected.

Feature: BGP

Probability: High

Found in Release: RX 02.7.00

Where Else Fixed: PATCH: RX 02.7.02 f

Defect ID: DEFECT000281680

Summary:

SNMP GET on The SNMPEngineTime does not return the correct system uptime.

Feature: SNMP Management

Probability: Medium

Found in Release: RX 02.7.02

Where Else Fixed: PATCH: RX 02.7.02 f

Defect ID: DEFECT000279003

Summary:

The LED on the Web-GUI for the 24x1 Gig copper module is tranposed between ports 1 and 2.

Symptom:

Incorrect LED status seen on the Web GUI.

Feature: Web Management

Probability: High

Found in Release: RX 02.7.02

Defect ID: DEFECT000279728

Summary:

Multicast traffic is flooded on all ports when IGMPv3 snooping enabled.

Symptom:

Multicast traffic is flooded on all ports.

Feature: IPv4 MC-Snooping (VLAN)

Probability: Medium

Found in Release: RX 02.7.02

Where Else Fixed: PATCH: RX 02.7.02 f

Defect ID: DEFECT000273160

Summary:

IP syslog source-interface command not functioning

Symptom:

All of the logs to the Syslog server are tagged wtih IP address of the interface where they come out.

Workaround:

Downgrade to 2.6.00 tree

Feature: SYSLOG

Probability: Medium

Found in Release: RX 02.7.02