• SAFETY follow all Safety Rules and Operating Instructions • UNPACKING in this Manual before using this product. • DESCRIPTION Sears, Roebuck and Co., • OPERATION Hoffman Estates, IL 60179 U.S.A. • ADJUSTMENTS Visit our Craftsman website: ® • MAINTENANCE www.craftsman.com...
If this Companion tool fails due to a defect in material or workmanship within one year from the date of purchase, RETURN IT TO ANY SEARS STORE OR OTHER CRAFTSMAN Failure to obey this safety warning CAN result in death or OUTLET IN THE UNITED STATES FOR FREE REPLACEMENT.
SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS cont. TOOL USE AND CARE SAFETY WARNING: BE SURE to read and understand all instructions in this manual before using this drill / driver. Failure to follow all instructions may result WARNING: BE SURE to read and understand all instructions before in electric shock, fire and/or serious personal injury.
SAFETY INSTRUCTIONS cont. SAFETY INSTRUCTIONS cont. ELECTRICAL SAFETY WARNING: BE SURE to read and understand all instructions before SPECIFIC SAFETY RULES FOR CORDLESS DRILL / DRIVERS operating this drill/driver. Failure to follow all instructions listed below may 1. Know your cordless drill / driver. Read operator’s manual carefully. Learn its result in electric shock, fire and/or serious personal injury.
SAFETY INSTRUCTIONS cont. SAFETY INSTRUCTIONS cont. SPECIFIC SAFETY RULES FOR CORDLESS DRILL / DRIVERS cont. SAFETY RULES FOR BATTERY CHARGER STAND / TRANSFORMER cont. 14. Do not charge battery pack in a damp or wet location. Following this rule will reduce the risk of electric shock.
• Crystalline silica from bricks and cement and other masonry products. 5. If any parts are missing, return to the nearest Sears store or other Craftsman • Arsenic and chromium, from chemically treated lumber. outlet to have the Drill / Driver replaced.
DESCRIPTION DESCRIPTION cont. KNOW YOUR CORDLESS DRILL / DRIVER (Fig. 1) This Cordless Drill / Driver has the following features cont.: 2. Keyless Chuck allows you to hand-tighten or loosen and release accessory bits in the NOTE: Before attempting to use this product, familiarize yourself with all operating chuck jaws without a chuck key.
Sears store or other Craftsman outlet to have it replaced. 7. After normal use, 3 hours or less of charging time is required to fully recharge battery pack.
OPERATION cont. OPERATION cont. ELECTRIC BRAKE CHARGING THE BATTERY PACK cont. (Fig. 4 and 4a) 8. The battery pack will become slightly warm to the touch while charging. This is normal To stop the drill/driver, release the trigger switch and the electric brake will stop the chuck instantly. and does not indicate a problem.
OPERATION cont. OPERATION cont. KEYLESS CHUCK (Fig. 7) 15 PLUS 1 ADJUSTABLE TORQUE CLUTCH (Fig. 9, 9a and 9b) The drill/driver has a keyless chuck which allows you to hand tighten or loosen accessory bits without the use of a chuck key. This drill / driver is equipped with an adjustable clutch that has 16 different torque settings.
OPERATION cont. OPERATION cont. INSTALLING ACCESSORY BITS (Figs. 11, 12 and 13) OPERATION AS A DRILL (Fig. 14) 1. Lock the trigger switch Off by placing the Forward / Reverse Selector Switch with Power Turn and set the torque clutch collar to the drilling position symbol .
OPERATION cont. MAINTENANCE OPERATION AS A SCREWDRIVER Fig. 15 WARNING: (Fig. 15) To avoid serious personal injury, always remove the battery pack from the tool when cleaning or performing any maintenance. Turn and set the torque clutch collar to the desired torque setting, 1 through 15.
(screwdriver) bit sets, spade bit sets, carbide-tipped masonry drill bit sets, extra long bits, magnetic bit holders and more. Visit your local Sears store or other Craftsman outlets or shop sears.com/craftsman for N i - C d all of the accessories for your drill/driver.
3/8-IN. VARIABLE SPEED / REVERSIBLE PARTS LIST PARTS LIST cont. CORDLESS DRILL / DRIVER 3/8-IN. VARIABLE SPEED / REVERSIBLE Model No. 172-10300 9.6 Volt CORDLESS DRILL / DRIVER Item No. Parts No. Part Description Qty. Model No. 172-10300 9.6 Volt screw CDT109JU-1 chuck...
3/8-IN. VARIABLE SPEED / REVERSIBLE PARTS LIST PARTS LIST cont. CORDLESS DRILL / DRIVER Model No. 172-10400 12.0 Volt 3/8-IN. VARIABLE SPEED / REVERSIBLE CORDLESS DRILL / DRIVER Item No. Parts No. Part Description Qty. Model No. 172-10400 12.0 Volt CDT109JU-1 screw CDT109JU-2...
NOTES NOTES 10-4-07 Drill 10300-10400...
Get it fixed, at your home or ours! Your Home For expert troubleshooting and home solutions advice: www.managemyhome.com For repair – in your home – of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For the replacement parts, accessories and owner’s manuals that you need to do-it-yourself.