Description - Craftsman 11533 - 9.6 Volt Cordless Model Operator's Manual

DESCRIPTION

KNOW YOUR CORDLESS DRILL / DRIVER (Fig. 1)
NOTE: Before attempting to use this product, familiarize yourself with all operating
features and safety rules.
Torque Adjustment Collar
Keyless Chuck
Chuck Jaws
Transformer
Trigger Switch
Charging Stand
On-Tool Bit
Storage
Red LED
Light
Slotted / Square Drive
Green LED
Light
Phillips
2 Double ended Screwdriver Bits
This Drill / Driver has many features for making its use more pleasant and enjoyable. Safety,
performance and dependability have been given top priority in the design of this product,
making it easy to maintain and operate.
This Cordless Drill / Driver has the following features:
1. Forward / Reverse Selector Switch with Power Lock-Off This switch is located above
and to the rear of the trigger switch. This switch has embossed arrows which show bit
rotation (forward or reverse). Push switch completely to left or right for desired rotation.
Push switch to center position to lock power off. This "lock power off" position helps
reduce the possibility of accidental starting when your drill / driver is not in use or you
are changing accessory bits.
12
DESCRIPTION cont.
This Cordless Drill / Driver has the following features cont.:
2. Keyless Chuck allows you to hand-tighten or loosen and release accessory bits in the
chuck jaws without a chuck key.
3. Torque Adjustment Collar provides you with 15 + 1 different torque settings, ideal for
driving different types of screws into different types of materials, and a setting for heavy
(twist bit) drilling (most torque).
Bubble Level 4. Electric Brake stops the bit rotation as soon as the trigger switch is released, ideal when
driving screws.
5. Bubble Level help provide more accurate vertical and horizontal drilling and driving.
6. Magnetic Bit Tray for holding screwdriver bits. This tray is located at the front base of the
drill / driver's handle and is handy for keeping the bits you are using on a project ready for
use.
7. Soft-Grip Handle Insert provides positive gripping for maximum control and comfort.
Forward/
8. Includes 2 Double Ended Scredriver Bits, 1 phillips and 1 slotted / square drive
Reverse
Selector
Switch with
Power
Lock-Off
PRODUCT SPECIFICATIONS
Model No. 10300:
Latch to
Release
Chuck
Battery
Motor
Pack
Switch
No Load Speed
Battery Pack
Model No. 10400:
Chuck
Motor
Switch
No Load Speed
3/8-in. keyless Clutch 15 + 1 Position
9.6 Volt Torque
Max. 80 in.-lbs.
Variable Speed
Charger Input 120V, 60Hz AC
0-500/min. Charge Rate 3 – 5 Hours
Clutch
3/8-in. keyless 15 + 1 Position
12.0 Volt Torque Max. 85 in.-lbs.
Variable Speed Charger Input
120V, 60Hz AC
Charge Rate
0-500/min. 3 – 5 Hours
13
10-4-07 Drill
10300-10400