Craftsman 11533 - 9.6 Volt Cordless Model Operator's Manual page 3

SAFETY INSTRUCTIONS
WARNING:
! BE SURE to read and understand all instructions in this
manual before using this drill / driver. Failure to follow all instructions may result
in electric shock, fire and/or serious personal injury.
WORK AREA SAFETY
1. Keep your work area clean and well lit. Cluttered workbenches and dark areas
invite accidents.
2. DO NOT operate power tools in explosive atmospheres, such as in the presence
of flammable liquids, gases, or dust. Power tools create sparks which may ignite
the dust or fumes.
3. Keep bystanders, children and visitors away while operating a power tool.
Distractions can cause you to lose control.
4. Make your workshop childproof with padlocks and master switches. Lock tools
away when not in use.
PERSONAL SAFETY
1. KNOW your cordless drill / driver. Read the operator's manual carefully. Learn the tool's
applications and limitations, as well as the specific potential hazards related to this tool.
2. STAY ALERT, watch what you are doing and use common sense when operating
a power tool.
3. DO NOT use power tools while tired or under the influence of drugs, alcohol or
medication. A moment of inattention while operating power tools may result in
serious personal injury.
4. DRESS properly. DO NOT wear loose clothing or jewelry. Pull back long hair. Keep
your hair, clothing, and gloves away from moving parts. Loose clothing, or long hair
can be caught in moving parts. Air vents often cover moving parts and should
also be avoided.
5. AVOID accidental starting. Be sure trigger switch is in the "Locked OFF" position
before inserting battery pack. DO NOT carry tools with your finger on the trigger switch.
Carrying tools with your finger on the trigger switch or inserting the battery pack in tools
that have the switch in the "FORWARD" OR "REVERSE" position invites accidents.
6. Do not overreach. Keep proper footing and balance at all times. Proper footing
and balance enables better control of the tool in unexpected situations.
7. ALWAYS SECURE YOUR WORK. Use clamps or a vise to hold work when practical.
It is safer than using your hand and frees both hands to operate tool.
8. USE SAFETY EQUIPMENT. Always wear eye protection. Dust mask, non-skid safety
shoes, hard hat, or hearing protection must be used for appropriate conditions.
4
SAFETY INSTRUCTIONS cont.
TOOL USE AND CARE SAFETY
WARNING:
! BE SURE to read and understand all instructions before
operating this drill / driver. Failure to follow all instructions listed below may result
in electric shock, fire and/or serious personal injury.
1. ALWAYS use clamps or other practical ways to secure and support the workpiece
to a stable platform. Holding the work by hand or against your body is unstable and
may lead to loss of control.
2. DO NOT force the tool. Use the correct tool and accessory bit for your application.
The correct tool and bit will do the job better and safer at the rate for which it is designed.
3. DO NOT use the tool if trigger switch does not turn it "On" or "Off". Any tool that
cannot be controlled with the trigger switch is dangerous and must be repaired.
4. REMOVE the battery pack from the drill / driver or place the forward /reverse
selector switch with power lock-off in the "Lock Off" position before making
any adjustments, changing accessories or storing the tool. Such preventive
safety measures reduce the risk of starting the tool accidentally.
5. STORE idle tools out of the reach of children and other untrained persons.
Tools are dangerous in the hands of untrained users.
6. ALWAYS remove battery pack and store separately when drill / driver
is not being used.
7. When battery pack is not in use, keep it away from other metal objects like:
paper clips, coins, keys, nails, screws, or other small metal objects that can
make a connection from one terminal to the other. Shorting the battery terminals
together may together may cause burns to skin, sparks and/or a fire.
8. MAINTAIN tools with care. Keep cutting tools such as twist drill bits sharp and
clean. Properly maintained tools with sharp cutting edges are less likely to bind and are
easier to use and control.
9. CHECK for misalignment or binding of moving parts, breakage of parts, and any
other condition that may affect the tool's operation. If damaged, have the tool serviced
before using. Many accidents are caused by poorly maintained tools.
10. USE ONLY accessories that are recommended for this tool. Accessories that may
be suitable for one tool may become hazardous when used on another tool.
See page 24 for accessories.
11. Keep the tool and its handle dry, clean and free from oil and grease. Always use
a clean cloth when cleaning. Never use brake fluids, gasoline, petroleum-based
products, or any strong solvents to clean your tool. Following this rule will reduce
the risk of loss or control and deterioration of the enclosure plastic.
5
10-4-07 Drill
10300-10400