Modifying Sql Server Settings; Deploying An Agent (Push Install) - Dell PowerVault DL4000 User Manual

The Summary tab is displayed for the machine.
2. From the Summary tab, click the Exchange Server Settings link.
The Exchange Server Settings dialog box is displayed.
3. In the Exchange Server Settings dialog box, you can select or clear the following settings:
– Enable automatic mountability check, or
– Enable nightly checksum check. You can further customize this setting by selecting the following:
* Automatically truncate Exchange logs after successful checksum check
* Truncate log before checksum check completes
4. You can also modify the logon credentials for your Exchange Server. To do so, scroll down to the Exchange Server
Information section and then click Change Credentials.
The Set Exchange Credentials dialog box is displayed.
5. Enter your new credentials and then click OK.

Modifying SQL Server Settings

If you are protecting data from Microsoft SQL Server, there are additional settings you need to configure in the
AppAssure 5 Core Console.
To modify SQL server settings:
1. After you have added the SQL Server machine for protection, from the AppAssure 5 Core Console, select the
machine in the Navigation pane.
The Summary tab is displayed for the machine.
2. From the Summary tab, click the SQL Server settings link.
The SQL Server Settings dialog box is displayed.
3. In the SQL Server Settings dialog box, edit the following settings, as needed:
– Enable nightly attachability check
– Truncate log after successful attachability check (simple recovery model only)
4. You can also modify the logon credentials for SQL Server. To do so, scroll down to the SQL Server Information table
and then click Change Credentials.
The Set SQL Server Credentials dialog box is displayed.
5. Enter your new credentials, and then click OK.

Deploying An Agent (Push Install)

AppAssure 5 lets you deploy the AppAssure 5 Agent Installer to individual Windows machines for protection. Complete
the steps in the following procedure to push the installer to an agent. To deploy agents to multiple machines at the same
time, see Deploying To Multiple
NOTE: Agents must be configured with a security policy that makes remote installation possible.
To deploy an agent:
1. Navigate to the AppAssure 5 Core Console and click the Machines tab.
2. In the Actions drop-down menu, click Deploy Agent.
The Deploy Agent dialog box is displayed.
3. In the Deploy Agent dialog box, enter the logon settings as described in the following table.
Machines.
97