Exporting Windows Data Using Hyper-V Export - Dell PowerVault DL4000 User Manual
Backup to disk appliance - poweredby appassure
Hide thumbs
Also See for PowerVault DL4000:
- User manual (175 pages) ,
- Owner's manual (101 pages) ,
- Deployment manual (22 pages)
Table of Contents
Advertisement
Text Box
Password
4.
In the Export Volumes pane, select the volumes to export. For example, C:\ and D:\.
5.
In the Options pane, enter the information for the virtual machine and memory usage as described in the following
table.
Text Box
Virtual Machine
Memory
6.
Click Perform initial ad-hoc export to test the export of the data.
7.
Click Save.
Exporting Windows Data Using Hyper-V Export
In AppAssure 5, you can choose to export data using Hyper-V Export by performing a one-time or continuous export.
Complete the steps in the following procedures to export using Hyper-V Export for the appropriate type of export.
Performing A One-Time Hyper-V Export
To perform a one-time Hyper-V export:
1.
In the Select Export Type dialog box, click One-time export.
2.
Click Next.
The Hyper-V Export - Select Recovery Point dialog box is displayed.
3.
Select a recovery point to export and click Next.
The Hyper-V dialog box is displayed.
Defining One-Time Settings For Performing A Hyper-V Export
To define one-time settings for performing a Hyper-V export:
1.
From the Hyper-V dialog box, click Use local machine to perform the Hyper-V export to a local machine with the
Hyper-V role assigned.
2.
Click the Remote host option to indicate that the Hyper-V server is located on a remote machine. If you selected the
Remote host option, enter the parameters for the remote host as described below.
114
Description
–
If you entered a local path, a user name is not required.
Enter the logon credentials for the virtual machine.
–
If you specified a network share path, you need to enter a valid password for an
account that is registered on the target machine.
–
If you entered a local path, a password is not required.
Description
Enter a name for the virtual machine being created. For example, VM-0A1B2C3D4.
NOTE: The default name is the name of the source machine.
Specify the memory for the virtual machine.
–
Click Use the same amount of RAM as the source machine to specify that the
RAM configuration is the same as the source machine. Or,
–
Click Use a specific amount of RAM to specify how much RAM to use. For
example, 4096 MB. The minimum amount allowed is 512 MB and the maximum is
determined by the capability and limitations of the host machine.
Advertisement
Table of Contents
