Dell PowerVault DL4000 User Manual page 113

Text Box
Password
2. In the Export Volumes pane, select the volumes to export. For example, C:\ and D:\.
3. In the Options pane, enter the information for the virtual machine and memory usage as described below:
Text Box
Virtual Machine
Memory
4. Click Export.
Performing a Continuous (Virtual Standby) VMware Workstation Export
To perform a continuous (virtual standby) VMware Workstation export:
1. In the Select Export Type dialog box, click Continuous (Virtual Standby) and then click Next.
The VM Export - Select Recovery Point dialog box is displayed.
2. Select a recovery point to export and then click Next.
The Virtual Standby Recovery Point to VMware Workstation/Server dialog box is displayed.
3. Enter the parameters for accessing the virtual machine as described below.
Text Box
Target Path
User Name
Description
– If you specified a network share path, you need to enter a valid user name for an
account that is registered on the target machine.
– If you entered a local path, a user name is not required.
Enter the logon credentials for the virtual machine.
– If you specified a network share path, you need to enter a valid password for an
account that is registered on the target machine.
– If you entered a local path, a password is not required.
Description
Enter a name for the virtual machine being created. For example, VM-0A1B2C3D4.
NOTE: The default name is the name of the source machine.
Specify the memory for the virtual machine.
– Click Use the same amount of RAM as the source machine to specify that the
RAM configuration is the same as the source machine.
– Click Use a specific amount of RAM to specify how much RAM to use. For
example, 4096 Megabytes (MB). The minimum amount allowed is 512 MB and the
maximum is determined by the capability and limitations of the host machine.
Description
Specify the path of the local folder or network share on which to create the virtual
machine.
NOTE: If you specified a network share path, enter a valid logon credentials for an
account that is registered on the target machine. The account must have read and
write permissions to the network share.
Enter the logon credentials for the virtual machine.
– If you specified a network share path, you need to enter a valid user name for an
account that is registered on the target machine.
113