Table of Contents
Advertisement
6.
Click OK.
Modifying deploy settings
To modify deploy settings:
1.
Navigate to the Core Console and click the Configuration tab, and then Settings.
2.
In the Deploy Settings pane, click Change.
The Deploy Settings dialog box displays.
3.
In the Agent Installer Name text box, enter the name of the agent executable file. The default is
Agentweb. exe.
4.
In the Core Address text box, enter the address for the core.
5.
In the Failed Receive Timeout text box, enter the number of minutes to wait without activity to
timeout.
6.
In the Max Parallel Installs text box, enter a number for the maximum installations that can be
installed in parallel.
7.
Select either or both of the following optional settings:
•
Automatic reboot after install
•
Protect After Deploy
8.
Click OK.
Modifying database connection settings
To modify database connection settings:
1.
Navigate to the Core Console, click Configuration → Settings.
2.
In the Database Connection Settings section, perform one of the following:
•
To restore the default configuration, click Restore Default.
•
To modify the database connection settings, click Change.
On clicking change, the Database Connection Settings dialog box appears.
3.
Enter the settings for modifying the database connection described as follows:
Text Box
Host Name
Port
User Name
(optional)
Password
(optional)
Retain event and
job history for,
days
4.
Click Test Connection to verify your settings.
5.
Click Save.
20
Description
Enter a host name for the database connection.
Enter a port number for the database connection.
Enter a user name for accessing and managing the database connection
settings. It is used to specify the log in credentials for accessing the database
connection.
Enter a password for accessing and managing the database connection
settings.
Enter the number of days to retain the event and job history for the database
connection.
Advertisement
Table of Contents
