Connecting A Home Theater System With Multiple Devices; Using The Remote Control; Installing Remote Control Batteries; Aiming The Remote Control - Dynex DX-32L100A13 User Manual

Using the remote control

Connecting a home theater system with
multiple devices
Notes
We recommend that you connect the AV receiver's
HDMI OUT jack to one of your TV's HDMI IN jacks.
Then, connect the AV receiver's DIGITAL AUDIO
INPUT jack to your TV's DIGITAL OUTPUT jack to
route Dolby Digital audio.
Blu-ray player/DVD player/VCR
AV receiver
Game console
or camera
Computer
The connections you make depend on the video and
audio jacks available on your devices. Refer to the
documentation that came with your devices for
connection information.
Remember to use the best connection types available for
the best picture and sound. For information about
connection types, see "What connection should I use?" on
page 8.
Using the remote control

Installing remote control batteries

To install the remote control batteries:
1
While pressing the cover release latch on the back of
the remote control, lift the cover off the remote
control.
Remote Control 1
Remote Control 2
Cable or satellite TV box
Antenna or cable TV
connected directly to
the wall jack
2
Insert two AAA batteries into the battery
compartment. Make sure that you match the + and –
symbols on the batteries with the + and – symbols in
the battery compartment.
3
Replace the battery cover.
Remote Control 1
Remote Control 2
Cautions
• Batteries should not be exposed to excessive
heat, such as sunshine, heat registers, or fire.
• Battery chemicals can cause a rash. If the
batteries leak, clean the battery compartment
with a cloth. If chemicals touch your skin, wash
immediately.
• Make sure that batteries are disposed of
correctly. Do not burn or incinerate.
Notes
• Do not mix batteries of different types.
• Do not mix old and new batteries.
• Remove batteries when the charge is depleted.
• If the remote control is not going to be used for
an extended period of time, remove the
batteries.

Aiming the remote control

To aim the remote control:
• Point the remote control towards the remote sensor
on the front of your TV.
17
DX-32L100A13