Connecting A Basic Home Theater System; Using The Remote Control; Installing Remote Control Batteries; Aiming The Remote Control - Dynex DX-24L230A12 User Manual

Using the remote control

Connecting a basic home theater system

Using digital audio
To connect a basic home theater system using digital
audio:
1
Make sure that your TV's power cord is unplugged
and the home theater system is turned off.
2
Connect a digital optical audio cable (not provided)
to DIGITAL OUTPUT jack on the back of your TV and
to the digital optical audio jack on the digital home
theater system.
Home theater system
Digital audio cable
Using analog audio
To connect a basic home theater system using analog
audio:
1
Make sure that your TV's power cord is unplugged
and the home system is turned off.
2
Connect an audio cable (not provided) to the AUDIO
OUT jacks on the side of your TV and to the AUDIO
IN jacks (L/R) on the home theater system.
Home theater system
Side of TV
DX-24L230A12/DX-32L220A12/DX-46L261A12
Using the remote control

Installing remote control batteries

Back of TV
AUDIO VGA
DIGITAL OUTPUT HDMI 1 PC IN

Aiming the remote control

To install the remote control batteries:
1
While pressing the cover release latch on the back of
the remote control, lift the cover off the remote
control.
2
Insert two AAA batteries into the battery
compartment. Make sure that you match the + and –
symbols on the batteries with the + and – symbols in
the battery compartment.
3
Replace the battery cover.
• Batteries should not be exposed to excessive
heat, such as sunshine, heat registers, or fire.
• Battery chemicals can cause a rash. If the
batteries leak, clean the battery compartment
with a cloth. If chemicals touch your skin, wash
immediately.
• Make sure that batteries are disposed of
correctly. Do not burn or incinerate.
• Do not mix batteries of different types.
• Do not mix old and new batteries.
• Remove batteries when the charge is depleted.
• If the remote control is not going to be used for
an extended period of time, remove the
batteries.
To aim the remote control:
• Point the remote control towards the remote sensor
on the front of your TV.
17