How To Specify Print Options (Dpof) - FujiFilm FinePix S3 Pro Owner's Manual

i PROTECTING IMAGES: SET ALL / RESET ALL
PLAYBACK MENU
ＳＥＴ ＡＬＬ ＳＥＴ ＡＬＬ
ＳＥＴ ＡＬＬ ＯＫ？ ＳＥＴ ＡＬＬ ＯＫ？
ＩＴ ＭＡＹ ＴＡＫＥ Ａ ＷＨＩＬＥ ＩＴ ＭＡＹ ＴＡＫＥ Ａ ＷＨＩＬＥ
ＣＡＮＣＥＬ ＣＡＮＣＥＬ ＹＥＳ ＹＥＳ
ＲＥＳＥＴ ＡＬＬ ＲＥＳＥＴ ＡＬＬ
ＲＥＳＥＴ ＡＬＬ ＯＫ？ ＲＥＳＥＴ ＡＬＬ ＯＫ？
ＩＴ ＭＡＹ ＴＡＫＥ Ａ ＷＨＩＬＥ ＩＴ ＭＡＹ ＴＡＫＥ Ａ ＷＨＩＬＥ
ＣＡＮＣＥＬ ＣＡＮＣＥＬ ＹＥＳ ＹＥＳ
4
◆
To stop the procedure midway
ＳＥＴ ＡＬＬ ＳＥＴ ＡＬＬ
ＣＡＮＣＥＬ ＣＡＮＣＥＬ
92 92
SET ALL
Press the "MENU/OK" button to protect all the
frames (files).
RESET ALL
Press the "MENU/OK" button to unprotect all the
frames (files).
When you have finished the procedure, lock the 4-
direction button to prevent accidental improper use.
◆
If the images are very large, protecting or
unprotecting all the frames (files) may take some
time.
If you want to take a picture during the procedure,
press the "BACK" button. To then return to protecting
or unprotecting all the frames (files), start the
procedure on P.91 from step 1 .
u HOW TO SPECIFY PRINT OPTIONS ( DPOF )
PLAYBACK MENU
DPOF stands for Digital Print Order Format and refers to a format that is used for
recording printing specifications for images shot using a digital camera on media such as
an xD-Picture Card and CF/Microdrive. The recorded specifications include information
on which frames are to be printed.
This section gives a detailed description of how to order your prints with the FinePix S3
Pro.
✽ Note that some printers do not support date and time imprinting or specification of the
number of prints.
✽ Note that the warnings shown below may be displayed while you are specifying the
prints.
4
5
When erasing the image, the DPOF setting for that image is deleted at the same time.
6
(➡P.94)
When inserting a media that contains images specified for printing on by another
camera, those print specifications are all reset and replaced by the new print
specifications.
u
(➡P.134)
Up to 999 images can be specified on the same media.
(➡P.86, 90)
4
93