How To Specify Print Options (Dpof); Dpof Set Frame (Frame Set/Reset) - FujiFilm Finepix S3000 Owner's Manual

i HOW TO SPECIFY PRINT OPTIONS ( DPOF )
w
PLAYBACK MENU
DPOF stands for Digital Print Order Format and refers to a format that is used for
recording printing specifications for images shot using a digital camera on media such as
xD-Picture Card. The recorded specifications include information on which frames are to
be printed.
This section gives a detailed description of how to order your prints with the FinePix S3000.
On the FinePix S3000, you can specify only one print per image in the DPOF settings.
✽ Note that some printers do not support date and time imprinting or specification of the
number of prints.
✽ Note that the warnings shown below may be displayed while you are specifying the
prints.
©
ø
When you erase the image, the DPOF setting for that image is deleted at the same time.
¥
(➡P.72)
If you insert an xD-Picture Card that contains frames specified for printing on another
camera, those print specifications are all reset and replaced by the new print specifications.
™
(➡P.119)
Up to 999 frames can be specified on the same xD-Picture Card.
70
(➡P.63)
i DPOF SET FRAME ( FRAME SET/RESET )
w
PLAYBACK MENU
1
1 0
Q
1 Set the Power switch to " ".
2 Press the "MENU/OK" button.
2
2 0
ＤＰＯＦ ＤＰＯＦ
ＲＥＳＥＴ ＡＬＬ ＲＥＳＥＴ ＡＬＬ
ＷＩＴＨＯＵＴ ＤＡＴＥ ＷＩＴＨＯＵＴ ＤＡＴＥ
ＷＩＴＨ ＤＡＴＥ ＷＩＴＨ ＤＡＴＥ
Press "d" or "c" to select " i " DPOF.
4
Continued
71