Dpof Set Frame - FujiFilm FinePix S3 Pro Owner's Manual

u DPOF SET FRAME
PLAYBACK MENU
1
1 0 0 2
3 0
2
ＤＰＯＦ ＤＰＯＦ
ＲＥＳＥＴ ＡＬＬ ＲＥＳＥＴ ＡＬＬ
ＷＩＴＨＯＵＴ ＤＡＴＥ ＷＩＴＨＯＵＴ ＤＡＴＥ
ＷＩＴＨ ＤＡＴＥ ＷＩＴＨ ＤＡＴＥ
3
0 1 0 2
ＤＰＯＦ ＤＰＯＦ
ＲＥＳＥＴ ＡＬＬ ＲＥＳＥＴ ＡＬＬ
ＷＩＴＨＯＵＴ ＤＡＴＥ ＷＩＴＨＯＵＴ ＤＡＴＥ
ＷＩＴＨ ＤＡＴＥ ＷＩＴＨ ＤＡＴＥ
◆
When DPOF settings were specified on another camera
ＲＥＳＥＴ ＤＰＯＦ ＯＫ？ ＲＥＳＥＴ ＤＰＯＦ ＯＫ？
ＮＯ ＮＯ ＹＥＳ ＹＥＳ
94 94
1 Press the "PLAY" button to select Playback
mode.
2 Unlock the 4-direction button.
3 Press the "MENU/OK" button to display the
menu screen.
Press "d" or "c" to select " u " DPOF.
" u " appears on the
LCD monitor during
playback when the
image has specified
with DPOF setting.
1 Press "a " or "b " to select "WITH DATE" or
"WITHOUT DATE". Selecting "WITH DATE" will
cause the date to be imprinted on your prints.
2 Press the "MENU/OK" button.
●
!
When selecting the "WITH DATE" setting, the date is
imprinted on your shots using the Print Service or a DPOF-
compatible printer (depending on the printer specifications,
the date may not be printed in some cases).
◆
When the data includes a frame (file) with DPOF
settings that were specified on another camera,
6
" " appears.
Pressing the "MENU/OK" button erases all of the
DPOF settings already specified for each frame (file).
Specify the DPOF setting for each frame (file) again.
●
!
Press the "BACK" button to leave the previous settings
unchanged.
4
1 0 0 2
ＤＰＯＦ：０００１１ ＤＰＯＦ：０００１１
Total number
of prints
Setting for
０１ ＳＨＥＥＴＳ ０１ ＳＨＥＥＴＳ
that frame
ＳＥＴ ＳＥＴ ＦＲＡＭＥ ＦＲＡＭＥ
5
ＤＰＯＦ ＤＰＯＦ
ＴＯＴＡＬ ／ １１ＳＨＥＥＴＳ ＴＯＴＡＬ ／ １１ＳＨＥＥＴＳ
Total number of prints
6
1 Press "d" or "c" to display the frame (file) for
which you want to specify DPOF settings.
2 Press "a" or "b" to set a value up to 99 as the
number of copies of the frame (file) to be printed.
For frames (files) that you do not want printed,
set the number of prints to 0 (zero).
To specify more DPOF settings, repeat steps 1
and 2.
●
!
Prints of up to 999 image frames (files) can be ordered on the
same media .
●
!
DPOF settings cannot be specified for CCD-RAW.
Pressing the "BACK" button while choosing settings
will cancel all current settings. If there were
previous DPOF settings, only the modifications are
cancelled.
Always press the "MENU/OK" button after the
settings are completed.
Pressing the "BACK" button cancels those settings.
◆ ◆
Canceling a frame
To cancel the DPOF setting for a frame (file) you
1
have specified (cancel frame), perform steps
and then:
1Press "d" or "c" to select the frame (file) with
the DPOF setting you want to cancel.
2Set the number of prints to 0(zero).
To cancel the DPOF setting for another frame (file),
repeat steps 1 and 2.
Press the "MENU/OK" button to complete the
settings.
When you have finished the procedure, lock the 4-
direction button to prevent accidental improper use.
3
to
4
95