Disconnecting The Camera; Connecting The Camera Directly To The Printer — Pictbridge Function; Specifying Images For Printing On The Camera - FujiFilm FinePix S3 Pro Owner's Manual

CONNECTING TO A COMPUTER

Disconnecting the camera

Quit all applications (FinePixViewer etc.) that are using the camera.
1
Perform the steps shown below before you turn the camera off. This procedure differs
2
depending on the operating system software (or PC) you are using.
OFF
Windows 98/98 SE (USB)
No PC operation is needed.
Windows 98 SE (IEEE 1394) /Me/2000 Professional/XP
1 Right-click the removable disk icon in the "My Computer"
window and select Eject. This step is only required in
Windows Me.
2 Left-click the Eject icon in the taskbar and select "USB Disk".
3 The menu option shown below appears. Click on this option.
✽ Screen for Windows XP
4 The "Safe To Remove Hardware" message box appears. Click the [OK] button or the close
button.
Macintosh
Drag the "Removable drive" icon on the desktop to the
Trash.
●
!
When you drag the icon to the Trash, "REMOVE OK" appears on
the camera's screen.
3
0 1 2 0
USB
socket
(mini-B)
DC IN 5V
socket
116
Check that the access lamp is off (no data is being
exchanged with the computer).
●
!
In some cases, the camera and computer may still be
communicating even after the "Copying" message disappears
from the computer screen. Always check that the access
lamp is off.
✽ Screen for Windows XP
1 Turn the camera off.
2 Unplug the USB cable (mini-B) or IEEE 1394
cable from the camera.
CONNECTING THE CAMERA DIRECTLY TO THE PRINTER —
PictBridge FUNCTION
When a printer that supports PictBridge is available, images can be printed by connecting the
camera directly to the PictBridge-compatible printer without using a PC.
●
!
In PictBridge function, images photographed on other than a camera may not be printed.
●
!
Always turn the camera off when disconnecting or connecting the USB cable. Connecting the camera to the printer while
the camera is turned on could damage the media.

Specifying images for printing on the camera

1
0 1 3 0 3
2 0
ＳＥＴ−ＵＰ ＳＥＴ−ＵＰ
3
1 2 4 5
ＢＥＥＰ ：ＬＯＷ ＢＥＥＰ ：ＬＯＷ
ＤＡＴＥ／ＴＩＭＥ ：ＳＥＴ ＤＡＴＥ／ＴＩＭＥ ：ＳＥＴ
ＵＳＢ ＭＯＤＥ ＵＳＢ ＭＯＤＥ
１３９４ ＭＯＤＥ ： １３９４ ＭＯＤＥ ：
ＣＡＮＣＥＬ ＣＡＮＣＥＬ ＳＥＴ ＳＥＴ
2
USB
socket
(mini-B)
DC IN 5V socket
3
4
ＣＨＥＣＫＩＮＧ ＵＳＢ ＣＨＥＣＫＩＮＧ ＵＳＢ
1 Set the Power switch to "ON".
2 Select " $ " in "USB MODE" in the "SET-UP"
menu (➡P.101).
3 Set the Power switch to "OFF" to turn the
camera off.
●
!
Do not connect to a PC when the USB mode setting is set to
" $ ". See P.137 if you connect to a PC by mistake.
1 Connect the camera to the printer using the USB
cable (mini-B).
2 Turn the printer on.
●
!
The camera cannot be used to specify printer settings such
as the paper size and print quality.
●
!
Please connect the AC Power Adapter AC-5VX (sold
separately) to your camera.
●
!
Use a media that was formatted on the camera.
Set the Power switch to "ON".
$
" CHECKING USB" appears on the rear
display panel for a few moments and then the
menu screen appears on the LCD monitor.
●
!
If the menu does not appear, check whether the USB mode
" ".
setting is $
●
!
Depending on the printer, some functions are disabled.
Continued
6
117