Set-Up Menu Options; Image Display; Procedure When "Preview" Is Set; Histogram - FujiFilm FinePix S3 Pro Owner's Manual

SET-UP

■ SET-UP menu options

Settings Display Factory default
IMAGE DISP. OFF/ON/PREVIEW OFF
CUSTOM WB SET
1
COLOR
sRGB/AdobeRGB sRGB
SPACES
D-RANGE WIDE/STANDARD WIDE
AUTO
ON/OFF ON
ROTATE
! (xD-Picture Card)
MEDIA
~ (CF/Microdrive)
2
TEST-SHOOTING
ON/OFF ON
(NO CARD)
FORMAT OK
% BEEP
LOW/HIGH/OFF LOW
DATE/TIME SET
USB MODE !~@/$ !~@
3
1394 MODE !~@/q1394@ !~@
FRAME NO. CONT./RENEW CONT.
4 ENGLISH
VIDEO SYSTEM NTSC/PAL
DISCHARGE OK
RESET OK
5
LIVE IMAGE ON
102
✽ How to display the SET-UP menu (➡P.101)
Explanation
Specifies whether the preview images (the photographed
image) is displayed after taking a picture.
Use this setting to specify an the correct white balance
—
setting for a light source.
Sets the color space to sRGB or Adobe RGB (1998).
Specifies whether the standard dynamic range (100%) or an
extended dynamic range (400%) is used.
Specifies whether the camera automatically detects shots
taken in the vertical position.
Sets the media to be used when an xD-Picture Card and
!
CF/Microdrive are loaded in the camera.
Select "ON" in this setting to release the shutter even when
no media is loaded in the camera. Note that no image is
recorded (unless a media is loaded).
— Erases all files.
Sets the volume of the tone emitted when the camera
controls are used.
— Corrects the date or time.
!~@ : DSC (Mass storage device) mode
This mode provides a simple way to read images from an a
media and store images onto a media.
The USB interface connection can be used for high-speed
file transfer.
$ : PictBridge
If a printer that supports PictBridge is available, images can
be printed by connecting the camera directly to the
PictBridge-compatible printer without using a computer.
!~@ : DSC (Mass storage device) mode
This mode provides a simple way to read images from an a
media and store images onto a media.
The IEEE 1394 interface connection can be used for high-
speed file transfer.
q1394@
: 1394 Shooting
Allows you to control the camera and take pictures from a
PC. Also allows the photographed images to be
automatically saved on the PC.
Specifies whether frame numbers are assigned
consecutively from previous numbers or begin again.
Specifies the language used for LCD monitor display.
— Specifies whether video output is set to NTSC or PAL.
— Discharges Ni-MH batteries.
Resets all the camera settings (other than the CUSTOM
WB, FORMAT, DATE/TIME, LANG. and VIDEO SYSTEM,
LIVE IMAGE) to the factory default values set at shipment.
—
A confirmation message appears when you press "c". To
reset the camera settings, press the "MENU/OK" button
again.
— Displays the live image on the LCD monitor.

IMAGE DISPLAY

page
This setting allows you to specify whether the resulting image is displayed after you take a shot.
103
OFF: The photographed image is automatically recorded without being displayed.
ON: The photographed image is displayed for about 2 seconds and is then automatically
104 recorded.
PREVIEW: The photographed image is displayed and then automatically recorded.
105 Pressing the "F2" button (Erase) while the image is displayed deletes the recorded
image. Pressing "F1" (End checking), "MENU/OK", "BACK" or the shutter button
clears the display ready for the next shot.
105
106

Procedure when "PREVIEW" is set

—
—
106
—
27
114
117
114
ＰＡＮＮＩＮＧ ＰＡＮＮＩＮＧ
114
106
28
—
107
—
108
End checking Standard chart
Erase
Preview zoom
Unlock the 4-direction button and press "a" or "b"
to zoom in or out.
To view another part of the image, press the
"PLAY" button and then press "a", "b", "d" or "c"
to move around. To return to zoom mode, press the
"PLAY" button again.

Histogram

Histogram
Pressing this button displays the histogram.
The display changes in a cycle from MASTER ➡ R
➡ G ➡ B each time the button is pressed.
MASTER
●
MIN MAX
!
See P.85 for more information on histograms.
Brightness warning and standard chart
Brightness warning
The display switches between the brightness
warning indicator and the standard chart each time
you press the button.
Use these features to check the brightness and
Gray scale
color tones in the image.
Color bar
Histograms
5
103