Turning On And Off / Setting The Date And Time; Correcting The Date And Time / Changing The Date Order - FujiFilm FinePix S3 Pro Owner's Manual

TURNING ON AND OFF / SETTING THE DATE AND TIME

1
2
ＤＡＴＥ／ＴＩＭＥ ＮＯＴ ＳＥＴ ＤＡＴＥ／ＴＩＭＥ ＮＯＴ ＳＥＴ
ＮＯ ＮＯ ＳＥＴ ＳＥＴ
3
ＤＡＴＥ／ＴＩＭＥ ＤＡＴＥ／ＴＩＭＥ
ＹＹＹＹ．ＭＭ．ＤＤ ＹＹＹＹ．ＭＭ．ＤＤ
２００４ ． １ ． １ ２００４ ． １ ． １
１２ ： ００ ＡＭ １２ ： ００ ＡＭ
ＣＡＮＣＥＬ ＣＡＮＣＥＬ
ＳＥＴ ＳＥＴ
0 1 2 0
4
ＤＡＴＥ／ＴＩＭＥ ＤＡＴＥ／ＴＩＭＥ
ＹＹＹＹ．ＭＭ．ＤＤ ＹＹＹＹ．ＭＭ．ＤＤ
２００４ ． ９ ． ２３ ２００４ ． ９ ． ２３
１０ ： ００ ＡＭ ： ００ ＡＭ
ＣＡＮＣＥＬ ＣＡＮＣＥＬ ＳＥＴ ＳＥＴ
0 1 0 2
26
To turn the camera on, set the Power switch to
"ON".
To turn the camera off, set the Power switch to
"OFF".
After purchasing the camera, first time when
turning camera on, the date and time are cleared.
Press the "MENU/OK" button to set the date and
time.
●
!
If the message (see figure at left) does not appear, refer to
"Correcting the date and time" (➡P.27) and check and correct
the date and time settings.
●
!
The message also appears when the batteries have been
removed and the camera has been left for a long period.
●
!
To set the date and time later, press the "BACK" button.
●
!
If you do not set the date and time, this message will appear
each time you turn the camera on.
1 Unlock the 4-direction button.
2 Press "d" or "c" to select Year, Month, Day,
Hour or Minute and then press "a" or "b" to
adjust the selected setting.
●
!
Holding down "a" or "b" changes the numbers continuously.
●
!
When the time displayed passes "12:00", the AM/PM setting
changes.
1 Once you have set the date and time, press the
"MENU/OK" button.
2 When you have finished the procedure, lock
the 4-direction button to prevent accidental
improper use.
●
!
At the time of purchase and after leaving the camera for a
long period with the batteries removed, settings such as the
date and time are cleared. Once the AC power adapter has
been connected or the batteries have been loaded for 2 days
or more, the date and time settings will be retained for
roughly 6 months even when the camera has no power
(batteries removed and AC power adapter disconnected).

CORRECTING THE DATE AND TIME / CHANGING THE DATE ORDER

1
1 0 0 2
2
ＳＥＴ−ＵＰ ＳＥＴ−ＵＰ
3
1 2 4 5
ＢＥＥＰ ：ＬＯＷ ＢＥＥＰ ：ＬＯＷ
ＤＡＴＥ／ＴＩＭＥ ＳＥＴ ＤＡＴＥ／ＴＩＭＥ ＳＥＴ
ＵＳＢ ＭＯＤＥ ： ＵＳＢ ＭＯＤＥ ：
１３９４ ＭＯＤＥ ： １３９４ ＭＯＤＥ ：
ＣＡＮＣＥＬ ＣＡＮＣＥＬ ＳＥＴ ＳＥＴ
1 0 2 0
3
ＤＡＴＥ／ＴＩＭＥ ＤＡＴＥ／ＴＩＭＥ
ＹＹＹＹ．ＭＭ．ＤＤ ＹＹＹＹ．ＭＭ ．ＤＤ
２００４ ． ９ ． ２３ ２００４ ． ９ ． ２３
１０ ： ００ ＡＭ １０ ： ００ ＡＭ
ＣＡＮＣＥＬ ＣＡＮＣＥＬ
ＳＥＴ ＳＥＴ
1 0 2 0 0 3
ＤＡＴＥ／ＴＩＭＥ ＤＡＴＥ／ＴＩＭＥ
ＭＭ／ＤＤ／ＹＹＹＹ ＭＭ／ＤＤ／ＹＹＹＹ
９ ／ ２３ ／ ２００４ ９ ／ ２３ ／ ２００４
１０ ： ００ ＡＭ ： ００ ＡＭ
ＣＡＮＣＥＬ ＣＡＮＣＥＬ ＳＥＴ ＳＥＴ
1 0 0 2 0 3
4
1 Unlock the 4-direction button.
2 Press the "MENU/OK" button.
1 Press "d" or "c" to move to option 3 and then
press "a" or "b" to select "DATE/TIME".
2 Press "c".
Correcting the date and time
1 Press "d" or "c" to select Year, Month, Day,
Hour or Minute.
2 Press "a" or "b" to correct the setting.
3 Always press the "MENU/OK" button after the
settings are completed.
●
!
Holding down "a" or "b" changes the numbers continuously.
●
!
When the time displayed passes "12:00", the AM/PM setting
changes.
Changing the date order
1 Press "d" or "c" to select the date order.
2 Press "a" or "b" to set the order. Refer to the
table below for details of the settings.
3 Always press the "MENU/OK" button after the
settings are completed.
Date order Explanation
Displays the date in the "year. month. day"
YYYY.MM.DD
format.
Displays the date in the "month / day / year"
MM/DD/YYYY
format.
Displays the date in the "day. month. year"
DD.MM.YYYY
format.
When you have finished the procedure, lock the 4-
direction button to prevent accidental improper use.
1
27