Multiple Exposure - FujiFilm FinePix S3 Pro Owner's Manual

p MULTIPLE EXPOSURE
RELEASE MODES
This is a photography technique that allows you overlay photographed images on top of each other.
You can use this technique to compose shots that cannot be obtained normally.
1
2
0 1
0 2
◆
Standard compensation value in Multiple exposure
In multiple exposure, a number of images are shot in the same frame. When you are overlaying
backgrounds and subjects, you must set the appropriate exposure offset before taking any shots.
■ General guide to exposure offsets
Number of exposures Compensation value
2
3
4
52
Hold down the release mode switch unlock button
p
and set the release mode switch to " " (multiple
exposure). When you select multiple exposure
p
mode, the " " icon appears in the viewfinder
display.
According to the photography conditions, hold
b " (exposure compensation) button 1
down the "
as you turn the Main-command dial 2 to set the
exposure offset.
◆
h Test shooting is recommended since the
compensation actually required varies depending
on the shooting situation.
h When the background is completely dark and
subjects do not overlap, no compensation is
necessary for each shot.
3
1 0
2 0
PREVIEW
4
PREVIEW
F 1 F 2 F 3 F 4
CSM 11: In multiple exposure mode, one shot is taken in the frame each time the shutter button is
pressed, but continuous shooting can also be used (➡P.111). Images in continuous
shooting are overlapped in the preview display. Use the "F1", "F3" and "F4" buttons. "
cannot be selected in continuous shooting.
●
!
Multiple exposures cannot be used when only 1 frame is shot in continuous shooting.
●
!
You cannot use the built-in flash for continuous shutter release.
●
!
See P.50 for the max. no. of consecutive shots in multiple exposure shooting.
1 When you compose, focus and take the shot, a
preview image appears on the LCD monitor.
2 Press the "F2" button to move on to the next
shot.
h A preview image is always displayed, regardless
of the "PREVIEW" setting selected in SET-UP.
h If you change the release mode before multiple
exposure shooting is completed, no images are
recorded.
The settings for multiple exposure shooting can
only be changed from the function menu. At this
point, the last settings specified apply.
When you take the next (multiple exposure) shot, a
preview appears showing the overlaid images.
h To record the image:
Press the "F1" or "MENU/OK" button.
h To take another multiple exposure shot:
Press the "F2" button.
h To take the shot again without using multiple
exposure mode:
Press the shutter button again.
h To cancel multiple exposure mode without
recording the shots:
Press the "F3" or "BACK" button.
h To check the brightness distribution:
Press the "F4" button.
3
K
"
53