Specifications; Assembly And Operation; Applications; Removal And Installation Method Of Battery - Hitachi C18DLP4 - 18V Li-Ion 6-1/2" Circular Saw Safety Instructions And Instruction Manual

English

SPECIFICATIONS

1. Cordless Circular Saw (C18DL)
Motor
No-load speed
Max. Cutting Depth
Blade Size
Model
Battery Type
Voltage
Light Bulb
Weight
2. Battery Charger
Model
Input power source
Charging time
(At a temperature of 68°F (20°C))
Charging voltage
Charging current
Weight
NOTE: The charging time may vary according to ambient temperature and power source voltage.

APPLICATIONS

Cutting various types of wood.
REMOVAL AND INSTALLATION METHOD
OF BATTERY
How to install the battery.
Align the battery with the groove in tool handle
and install it into place.
Always insert it all the way until it locks in place
with a little click, If not, it may accidentally fall out
of the tool, causing injury to you or someone
around you (Fig. 5).
Handle
Insert
Push
10

ASSEMBLY AND OPERATION

Pull
out
Latch
Battery
Fig. 5
DC motor
3,400/min
2-1/4" (57 mm)
6-1/2" (165 mm) D × 5/8" (15.9 mm) H × 1/16" (1.6 mm) T
EBM1830
Lithium – ion battery
7.1 lbs. (3.2 kg)
UC18YRL/UC18YFL
Single phase: AC120V 60Hz
Approx. 20 min. .....BCL1815
Approx. 45 min. .....EBM1830
DC 7.2 – 18V
1.3 lbs. (0.6 kg)
How to remove the battery.
Withdraw battery from the tool handle while
pressing the latches on both sides of the battery
(Fig. 5).

CHARGING METHOD

NOTE
Before plugging into the receptacle, make sure the
following points.
The power source voltage is stated on the
nameplate.
The cord is not damaged.
WARNING:
Do not charge at voltage higher than indicated on
the nameplate.
If charged at voltage higher than indicated on the
nameplate, the charger will burn out.
1. Insert the plug of battery charger into the
receptacle.
When the plug of battery charger has been inserted
into the receptacle, the charge status lamp will
blink in red. (At 1-second intervals)
BCL1815
DC 18V
12V, 5W
6.6 lbs. (3.0 kg)
DC 3.5A