Table of Contents
Advertisement
NAMES OF PARTS (Fig. 1 – Fig. 16)
Rechargeable battery
1
Latch
2
Handle
3
Pilot lamp
4
Drill mark
5
Clutch dial
6
Triangle mark
7
Hammer mark
8
Shift knob
9
Screw
0
Hook
!
SYMBOLS
WARNING
The following show symbols used for the machine.
Be sure that you understand their meaning before
use.
DS18DBSL: Cordless Driver Drill
DV18DBSL: Cordless Impact Driver Drill
To reduce the risk of injury, user must read
instruction manual.
Direct current
V
Rated voltage
n
No-load speed
0
/min
Oscillation per minute
Bpm
Impact rate
Ls
Low speed
Hs
High speed
Brick
Wood
Metal
Machine screw
Wood screw
Drill chuck capacity
Weight
kg
Drilling
Impact drilling
Switching ON
Switching OFF
Disconnect the battery
Groove
@
Trigger switch
#
Remaining battery
$
indicator lamp
Display panel
%
Remaining battery
^
indicator switch
Sleeve
&
Push button
*
Rubber cover
(
USB port
)
USB cable
q
Change rotation speed - High speed
Change rotation speed - Low speed
Clockwise rotation
Counterclockwise rotation
The battery remaining power is nearly empty.
Recharge the battery soonest possible
The battery remaining power is a half.
The battery remaining power is enough.
Lights ;
The battery remaining power is over 75%
Lights ;
The battery remaining power is 50% – 75%.
Lights ;
The battery remaining power is 25% – 50%.
Lights ;
The battery remaining power is less than 25%
Blinks ;
The battery remaining power is nearly empty.
Recharge the battery soonest possible.
Blinks ;
Output suspended due to high temperature.
Remove the battery from the tool and allow it to
fully cool down.
Blinks ;
Output suspended due to failure or malfunction.
The problem may be the battery so please
contact your dealer.
Warning
STANDARD ACCESSORIES
In addition to the main unit (1 unit), the package contains the
accessories listed on page 11.
Standard accessories are subject to change without notice.
APPLICATIONS
<DS18DBSL>
○ Driving and removing of machine screws, wood screws,
tapping screws, etc.
○ Drilling of various metals
○ Drilling of various woods
<DV18DBSL>
○ Drilling of brick and concrete block, etc.
○ Driving and removing of machine screws, wood screws,
tapping screws, etc.
○ Drilling of various metals
○ Drilling of various woods
SPECIFICATIONS
The specifi cations of this machine are listed in the Table on
page 11.
NOTE
Due to HiKOKI's continuing program of research and
development, the specifi cations herein are subject to
change without prior notice.
5
Advertisement
Table of Contents
