Error Messages - Panasonic KX-WT125 Operating Instructions Manual

Troubleshooting and Error Messages
Problem
The handset
does not operate
according to
the settings
specified for
Doorphone
in "Setting
Handset".

Error Messages

Error Message
Register Unit
No Service
PS Not
Connected
CS Busy
Please
Wait...
72
Possible Cause
The settings for a PS ring
group were used for the
incoming call.
Possible Cause
The handset has been
canceled or the handset
has not been registered.
The handset is out of
range.
The CS is turned off.
The called handset is out
of range or is not turned
on.
The CS is busy.
The handset is connecting
to the CS or PBX.
Solution
• When you receive a call
as a member of a PS
ring group, the handset
operates according to the
"Group Ring" settings
in "Setting Handset",
even if the call is from a
doorphone. To make the
handset operate according
to the "Doorphone"
settings in "Setting
Handset", have the call
arrive through an ICD
group. (See "Incoming
Option" on page 59.)
• Consult your dealer.
Solution
Consult your dealer.
Move closer to the CS.
Make sure the power cord is
connected.
Try again later.
Try again later.
Wait for a moment.