Installation; Battery Installation; Charger Connection - Panasonic KX-WT125 Operating Instructions Manual

Dect 6.0 portable station
Hide thumbs Also See for KX-WT125:
Table of Contents

Advertisement

Installation

Battery Installation

Open the battery cover, insert the batteries, and close the cover as indicated below.

Charger Connection

Connect the AC adaptor to the charger.
• The AC adaptor should be connected to a vertically oriented or floor-mounted
AC outlet. Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the
weight of the adaptor may cause it to become disconnected.
• Fasten the AC adaptor cord to the cord holder.
• Use only the included Panasonic AC adaptor. (See "Accessories (included)" on
page 4.)
WARNING
• To reduce the risk of fire or electric shock, do not overload AC outlets and
extension cords.
• Do not bundle the charger's AC adaptor cord with the power cords of machines
located nearby.
• Completely insert the AC adaptor/power plug into the AC outlet. Failure to do so
may cause electric shock and/or excessive heat resulting in a fire.
• Regularly remove any dust, etc. from the AC adaptor/power plug by pulling it from
the power outlet, then wiping with a dry cloth. Accumulated dust may cause an
insulation defect from moisture, etc. resulting in a fire.
Hooks
Before Initial Use
To AC Outlet
5

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-wt126

Table of Contents