Panasonic KX-WT125 Operating Instructions Manual page 60

Configuring Handset Settings
Sub Item
Memo Alarm
Headset
Ringer
*
1
When receiving a call as a member of a PS ring group, the handset will operate
according to the "Group Ring" incoming call settings.
*
2
If calls from a doorphone are set to arrive at a PS ring group, the handset will
operate according to the "Group Ring" settings and not the "Doorphone"
settings.
*
3
The preset melodies in this product are used with permission of © 2009
Copyrights Vision Inc.
*
4 When "Ring On Charger" is set to "On" but "Ringer Volume" is set to "Off",
the handset rings at level 1.
Talk Option
Sub Item
Speaker
Volume
Receiver
Volume
Headset
Volume
60
Description
Ringer Pattern
Selects the ringer
pattern for each Memo
Alarm.
Vib. Pattern
(KX-WT126 only)
Selects the vibrate
pattern for each Memo
Alarm.
Selects whether a
tone is heard from the
attached headset while
receiving a call.
Description
Adjusts the rear speaker
volume.
Adjusts the receiver
volume.
Adjusts the headset
speaker volume.
Setting
• Bell 1-5
• Melody 1-3
• Single
• Double
• Triple
• Short Double
• Short Triple
• Short Term
• Continuous
• On
• Off
Setting
Level 1-6
Level 1-4
Level 1-4
Default
Bell 1
Single
Off
Default
Level 3
Level 2
Level 2