Table of Contents
Advertisement
4
Mount the unit on a wall then slide down to
secure in place.
R This product is compliant with the following
wall phone plate sizes (2 types).
1
83 mm (3
/
1
4
102 mm (4 inches)
2
Fit the slots of the unit onto the
corresponding wall phone plate tabs for
(
3
) and (
4
) respectively.
1
Error messages
Display message
Ask phone
company for
VM access #
Main unit no power
or
No link. Re-
connect base
AC adaptor.
Busy
For assistance, please visit http://shop.panasonic.com/support
TGF85x_(en)_1023_ver001.pdf 55
inches)
3
4
3
2
4
Cause/solution
R You have not stored the voicemail access number. Store the
number (page 53).
R Confirm the base unit's AC adaptor is connected to the unit and
the power outlet correctly.
R The handset has lost communication with the base unit. Move
closer to the base unit and try again.
R Unplug the base unit's AC adaptor to reset the unit. Reconnect
the adaptor and try again.
R The handset's registration may have been canceled. Re-register
the handset (page 43).
R The called unit is in use.
R Other units are in use and the system is busy. Try again later.
R The handset you are using is too far from the base unit. Move
closer and try again.
R The automated call block function is in operation. Try again later.
R One of the units is screening for telemarketing call. Try again later.
R One of the units is recording a conversation with outside caller.
Try again later.
Useful Information
Charger
Drive the screws (
1
) (not supplied) into the wall.
1
27.2 mm (1
/
inches)
2
16
2
1
55
10/23/2019 1:26:12 PM
Advertisement
Table of Contents
